Malossi bigbore, Multivar w/7 grams weights, white contra spring, Malossi gear up kit and Giannelli Reverse exhaust.
Malossi bigbore, Multivar w/7 grams weights, white contra spring, Malossi gear up kit and Giannelli Reverse exhaust.
Glyptocephalus cynoglossus lover
Quest for no 3D glasses
cool! So the giannelli performs well?
Aprilia SR Factory 50 2006 IE Morini Engine type
13 500KM
MAX Speed after rod in 92KM/H flat no wind, 104 KM/H tuck
Malossi BBK + Full Circle Crank since 10 287KM
Stock Gears
ECU : Malossi
Mod : Leo Vince ZX-R Pipe flat black ceramic coated - HGT regulator Gen III - Malossi multivar 2000 - 9.0gr Dr. Pulley rollers - Malossi delta clutch small white spring big white spring w/o tc - Malossi belt - Malossi red foam air filter - ZMR7AP plug - Water trap - Malossi Reed valve VL-12 - Buzzetti side stand - YSS Rear shock.
It's ok, all I care about is that it performs better than the stock.. am able to maintain a speed of 80kph pretty much wherever I go, and that is enough for me..
Glyptocephalus cynoglossus lover
Quest for no 3D glasses
mmm 80kph maintained... my dreams will soon come true
EasilyOriginally Posted by Rosscofat
mmm 80kph maintained... my dreams will soon come true
SR DiTech Piaggio c361 2005
Polini Kit 70cc
Polini Bowl
Malossi Multivar 2000
Original Piaggio Contra Spring
Rollers Malossi HT 7.5 grams
Malossi Special Belt
Malossi Oil 7.3 & Agip City 2T
Malossi Gears HTQ 14/39
Gianelli Reverse
Air Diffuser 20mm
Clutch Stage6 Torque Control MKII
RMS Crank
Woodruff Key 3degrees
Malossi Air Filter
Polini Carbon Reeds 0.35
Water Trap
Fuel Pump Mod
Ecu Derestricted version 2.8.0
Spark Plug NGK ZMR7AP
Sava MC 29 Sporty 3+
Lights Philips Master LED spot LV 10wx2
Brembo brake pads
It was exactly that goal I was looking for, mainly 70kph. Which is the maximum speed we are allowed with a scoot here. And yea, it's surprising how much torque we have compared to 50cc.It's ok, all I care about is that it performs better than the stock.. am able to maintain a speed of 80kph pretty much wherever I go, and that is enough for me..
Aprilia SR Factory 50 2006 IE Morini Engine type
13 500KM
MAX Speed after rod in 92KM/H flat no wind, 104 KM/H tuck
Malossi BBK + Full Circle Crank since 10 287KM
Stock Gears
ECU : Malossi
Mod : Leo Vince ZX-R Pipe flat black ceramic coated - HGT regulator Gen III - Malossi multivar 2000 - 9.0gr Dr. Pulley rollers - Malossi delta clutch small white spring big white spring w/o tc - Malossi belt - Malossi red foam air filter - ZMR7AP plug - Water trap - Malossi Reed valve VL-12 - Buzzetti side stand - YSS Rear shock.
Not like the police are after you guys at drummond, Nadeau,Jarry and a bunch of others run higher speed and louder haaha
Sr50 2009 piaggio engine.
Leovince Zx-R
Doppler air filter
Ecu derestricted.
93 kph on flat
Quebec
70kph is the max here too but no one listens
Well in town speed limit is 50kph and police is giving ticket above 70kph even for cars. So I keep it low, 68-70, funny our speedo never gives the 69 number hehe, I taught Italian were more naughty. The truth is if I'm running on another speed zone, I go 20kph more than limit and yea I dont think police will care about it. They dont want us keeping trafic slow, it's more dangerous for everybody. I mainly use it in 50kph so I only need fast acceleration which BBK gives me really well.
Aprilia SR Factory 50 2006 IE Morini Engine type
13 500KM
MAX Speed after rod in 92KM/H flat no wind, 104 KM/H tuck
Malossi BBK + Full Circle Crank since 10 287KM
Stock Gears
ECU : Malossi
Mod : Leo Vince ZX-R Pipe flat black ceramic coated - HGT regulator Gen III - Malossi multivar 2000 - 9.0gr Dr. Pulley rollers - Malossi delta clutch small white spring big white spring w/o tc - Malossi belt - Malossi red foam air filter - ZMR7AP plug - Water trap - Malossi Reed valve VL-12 - Buzzetti side stand - YSS Rear shock.
Yup I am excited for the same feeling. Gotta keep up with traffic.
Posting Permissions
Reply With Quote
