As I've probably pointed out :P ....
Im recently running Gab's V2/V5 eprom.
At the moment Im only using the V5 as I havent put in a switch yet.
I know I'll not switch it over that often to V2, but does anyone have a switch installed?
Im curious where you've placed it amd what kinda switch to use!
Pics plz!!!
"You have enemies? Good. That means you've stood up for something, sometime in your life." -- WC
BRONSON!! Fucking great movie dude! Uhh, no, no switch.
Funny quip goes here
seen a few of these over the years, so ran a Search on 'map switch'.
After reading through good and bad info, and general piss taking, there are these.
http://www.apriliaforum.com/forums/s...ght=map+switch
http://www.apriliaforum.com/forums/s...ght=map+switch
http://www.randomexploits.com/projec..._selectors.htm
-Quick
--------------
Throttle body settings: "It's more a philosophy than pure numbers." -Gabro
Just call me 'Casino'; Liquor in the front, poker in the rear.
Aw, heck - You mean what I know...
Haha Hell yeah! Bronson rocks!!!Originally Posted by WileECoyote
I knew not much peepz are running the V2
"You have enemies? Good. That means you've stood up for something, sometime in your life." -- WC
Thanks for doing my homework Quick!
I did some searching but unfortunately without result...
Liking the idea of putting the switch on the handlebars.
But since it'll be used rarely i think the option of the connector will do just fine!
Edit:
Btw switching can be done whilst the beast is purring right?
Nevermind!!! Is should RTFM!!!
Last edited by Dispar Vulgo; 06-07-2012 at 11:14 AM.
"You have enemies? Good. That means you've stood up for something, sometime in your life." -- WC
np...
and, the AF1 quick-release pins for the seat (AND the tank) just might be worth the investment, popping the seat off takes but a couple seconds.
I think they work out to about $280/lb, but...
http://www.af1racing.com/store/Scrip...idproduct=1481
not as bad as a $13.99 friggin hose clamp!!! http://www.af1racing.com/store/Scrip...idproduct=2389
-Quick
--------------
Throttle body settings: "It's more a philosophy than pure numbers." -Gabro
Just call me 'Casino'; Liquor in the front, poker in the rear.
Aw, heck - You mean what I know...
I made my own quick release pins by using long shank bolts. I cut the allen head off and threaded them in far enough to find a decent amount of shank to drill a hole then used a small clip to secure seat. Pull clip, pop seat off.
Yeah, I'm cheap............................................
Funny quip goes here
Those pins would be such a relief indeed!!!
"You have enemies? Good. That means you've stood up for something, sometime in your life." -- WC
Get 4 and do the tank aswell.
FUCK THE MAGS Nuke the whales!
I see to recall that the ORIGINAL Tuono was around £18000 new......
Only 200 of them made (and yours ain't one of them FTM.....) worldwide.
The Male Whale
Yeah, I fitted a dual map Gab recently and installed a switch while at it. Mounted it under the pillion on one of the unused plastic lugs for relays.As I've probably pointed out :P ....
Im recently running Gab's V2/V5 eprom.
At the moment Im only using the V5 as I havent put in a switch yet.
I know I'll not switch it over that often to V2, but does anyone have a switch installed?
Im curious where you've placed it amd what kinda switch to use!
Pics plz!!!
I just purchased a small lever switch, two pole, and soldered it in. Works OK. Now have a nice mellow 'wet' mode as well as full on 'lairy'
For the record, I just crimped on a wee quick-release connector to the #16 wire; all I have to do is pop the seat, and yank it apart, or push it together.
But... I don't feel a need to mess with it, as the map 2 is richer, for the open airbox which is not currently installed.
Oh- I also put a really small zip/spoke tie on the cotter pins that lock the seat pins - easier to grab when removing.
-Quick
--------------
Throttle body settings: "It's more a philosophy than pure numbers." -Gabro
Just call me 'Casino'; Liquor in the front, poker in the rear.
Aw, heck - You mean what I know...
Gonna keep it simple too!
Probably wont switch it that often to the V2 anyways...
maybe if its running low on fuel
"You have enemies? Good. That means you've stood up for something, sometime in your life." -- WC
i dont think it would make that much of a noticable difference unless you were motorway droning. even so i managed to get 10 mile to the liter with gabros chip + 57mm throttle bodies. usually get about half that when giving it a good spanking.
Just to keep you guys posted...
Well I installed the switch.
Didnt get to testing it tho
"You have enemies? Good. That means you've stood up for something, sometime in your life." -- WC
I found a nice weatherproof handlebar mount toggle switch, I can post a picture later. Not too cheap, but nice and clean and doesn't take up much space.
___________________
2004 Tuono RSV 1000
2008 Victory Hammer
2008 Yamaha Fz6
Posting Permissions
Reply With Quote
