has anyone done this yet?
any opinions?
has anyone done this yet?
any opinions?
EXCREW RIP 1/08/06
01 RS50/72cc MetraKit HM, MK cdi, Arrow CF, 21mm del phbg, uprated Clutches, Cf reeds, DiD chain, Galfer front and rear ss brake lines, Tinted Screen...
01 Rieju rs1-50 stock stock stock :thumbdown
Backup motor 04 AM6 motor, athens74, 24mm del, Doppler ER1 crank, Barnett Clutch, stock pipe
patrick has looked into it but dont know if he has ever fitted one....
if you got a bore kit and all the rest its a very good idea for getting more top speed whilst keeping good acceleration
Engine Always Screaming!
Its Not What You Ride Its How You Ride It
I never fitted one no, but if you got a big bore setup it should work really well, you can keep the gearing of the chain and sprockets shorter so it accelerates really well in the first 5 gears, and than the 6th gear is only longer so on long drives the bike doesnt over rev in 6th and/or you get more top speed in 6th.
Its basicly the same like some alternative gearboxes for the AM-6 offer but at a fraction of the cost because you only change one gear instead of the whole box.
Im proppably gonna fit one wen im gonna rebuild my engine/bike.
patrick are you still going to stick with a stock Rs or are you going all out again and tuning it with pink top kit ect ect
p.s tune it and leave police behind!if need be make a lil electric button which slides a black sheet accross ya reg plate so they cant read it when they chase
be like ghostrider all over again
![]()
Engine Always Screaming!
Its Not What You Ride Its How You Ride It
If you payed atension you would knew its no longer stock... Giannelli pipe is back on with a SHA 12mm carb i had laying around, so does 75kmh now tops but doesnt run to well because of the stiff reeds and the fact the engine is in serious need of a rebuild.
Cant wait till i got enough money to spare to rebuild the bike, i am gonna install the 6th gear in there also than, looking at how it accelerates and shifts now nearly stock it already has power enough to make use of it in 6th (bike goes trough its powerband completly in 6th, so a loinger 6th gear would be nice even with my setup)
maybe get a quick onboard video if you can zip tie a phone on or something? as long as the phone isnt worth hundreds haha
Engine Always Screaming!
Its Not What You Ride Its How You Ride It
lol easyparts does not ship to the states
guess I have to look for another vendor
EXCREW RIP 1/08/06
01 RS50/72cc MetraKit HM, MK cdi, Arrow CF, 21mm del phbg, uprated Clutches, Cf reeds, DiD chain, Galfer front and rear ss brake lines, Tinted Screen...
01 Rieju rs1-50 stock stock stock :thumbdown
Backup motor 04 AM6 motor, athens74, 24mm del, Doppler ER1 crank, Barnett Clutch, stock pipe
planetracingusa.com sells to the US
They say it adds aroun 10% more top speed. should be good becuase 6th gear is really short...
EXCREW RIP 1/08/06
01 RS50/72cc MetraKit HM, MK cdi, Arrow CF, 21mm del phbg, uprated Clutches, Cf reeds, DiD chain, Galfer front and rear ss brake lines, Tinted Screen...
01 Rieju rs1-50 stock stock stock :thumbdown
Backup motor 04 AM6 motor, athens74, 24mm del, Doppler ER1 crank, Barnett Clutch, stock pipe
EXCREW RIP 1/08/06
01 RS50/72cc MetraKit HM, MK cdi, Arrow CF, 21mm del phbg, uprated Clutches, Cf reeds, DiD chain, Galfer front and rear ss brake lines, Tinted Screen...
01 Rieju rs1-50 stock stock stock :thumbdown
Backup motor 04 AM6 motor, athens74, 24mm del, Doppler ER1 crank, Barnett Clutch, stock pipe
EXCREW RIP 1/08/06
01 RS50/72cc MetraKit HM, MK cdi, Arrow CF, 21mm del phbg, uprated Clutches, Cf reeds, DiD chain, Galfer front and rear ss brake lines, Tinted Screen...
01 Rieju rs1-50 stock stock stock :thumbdown
Backup motor 04 AM6 motor, athens74, 24mm del, Doppler ER1 crank, Barnett Clutch, stock pipe