ventura mounting instructions?

[gspat]

as title states,i got set on ebay & need to see what i am missing to mount properly.thanks,pat

[mini_me]

Now I know who beat me to the Ebay set...

Cant you pull the instructions of their website?

[Racer X]

there's a washer that helps the rear pass peg. stay aligned. it goes on the front set of bolts the rack, lines up w/ th rear set

the bolt from the silver hanger thingy is used to hold the rack, you jut have to drill out the plastic of the undertail a little so the rack slides up there

and really put the rear rack on then tighten everything.

[gspat]

x,is the rear rack mount bolts the bunggi hooks?[same as the bobbins for rear stand?]pat

[Racer X]

NO, they are in the undertail area. the silver vertical spool things (prob. where you;d hook a bungie net too) on the undertail of the bike


unscrew them
take off the "button" part, use the same bolt


drill out the plastic undertail a little bit, so the rack slides up in there

and bolt em up

[gspat]

thanks,pat

[ChrisE]

Hope these help

[gspat]

chris;nice pics,thanks,pat

[Tifa]

drill out the plastic undertail a little bit

But don't go crazy with the drill.....if you're not carefull, it's easy to drill straight through, and drill out the threads in the alui....you're looking just to enlarge the plastic opening enough so that the rack fit's up snugly to the undertary.

[jrflanne]

Just installed Ventura on the Tuono. Easy-piezy and it didn't screw the ass of the bike too bad. Stuff looks well-made and I wish I would have just gotten that in the first place instead of being a cheap bastard.

[Jeff U]

Here are the official instructions