Sold pre mix only oil

[miked3240]

Guy at motorcycle shop sold me bel ray h1-r 2 stroke synthtic i asked for injector oil .on the back of bootle in fine print say pre mix only. Ihave 1999 aprilia rs 50 i put it in injector tank whats the best way to drain it should i just pull the hose from bottom of injector tank.if i get most of it out will i be alright.i didnt read bootle in store didnt realize till i looked online about it that it waz premix only.i tried to start it didnt start bike been in storage few years i guess clogged carb will this oil ruin engine just trying to start it

[Kentiish Lad]

It should be fine mate, as long as its no cheap crap oil it will still do the same job

[camb00]

should be fine aslong as its not gloopier than normal 2 stroke

[RS_Patrick]

DRAIN IT A.S.A.P.

Just take the oiltube from the oilpump and drain the oil tank, its not for nothing "premix only", its gonna ruin your oilpump and the seals of the pump, maybe even the rubber tube from the oil tank, and the oil level sensor.

On top of that its a difrent viscosity so you get a difrent output from the pump.

Try to get as much out of the tank as posible, some oils react on each other forming a sort of gunk stuff with in the oil it self.

Wen you fill the tank again with the right oil, leave the tube of the pump for a sec untill oul comes out, than put it back on the pump and bleed the pump untill your sure theres no air bubble thats gotten in there. (if you dont know how to bleed the oilpump and cant find it here with search, please ask)

If your bike is upgraded with a bigger carb etc. you can put 1:100 (i would even advice that) trough the feul so the oil you draint doesnt go to waste.

[miked3240]

what if i never ran engine but tried to start it it did not starts think carb clogged

[RS_Patrick]

Doesnt matter, once you pull the tube that comes from the oiltank of the oilpump you need to do the above, so thats what has to be done mate, and like i said A.S.A.P. as the oil can knacker the rubbers and seals... the longer you keep it in there the more time it gets to desolve the rubber components.