OZ angled tire valves + Stop & Go tire plugger kit

[The Foreigner]

2 requests in 1 thread:

do you guys think these will fir the OZ wheels ? angled tire valves

also

any of the US guys , can you do me a favor and purchase a Stop &Go tire plugger kit WITH CO2 bottles (retails for $45) and ship it to my Romanian address ? I can't find anything decent for my long trips this summer and all the eBay sellers or local sellers want in excess of $40 for shipping (damn vultures)

I kinda need it before end of May so a quick response to this thread is welcomed.

[planter87]

for the angled valves, i have them in my brembo wheels, got to check what size the hole is if anyone knows. they do work but could be 8 or 10mm hole

[weasel221]

my T took the smaller of the 90's, 8mm??

[FTM]

Is it allowed to send pressurised canisters by airmail? Surface mail will be too slow I'm guessing.

[tasi]

Personally i would take the string type .

[The Foreigner]

oops, forgot about the airmail restrictions, no CO2 one will do fine, I can find CO2 cans locally probably

Tasi, what string are you taking about ?

[RossGuzzi]

I would go to a good cycling shop for co2 cans. Sometimes cheeper !

[The Foreigner]

I would go to a good cycling shop for co2 cans. Sometimes cheeper !

yah, found them at the local Decathlon (like a home depot for all sports)

[The Foreigner]

my T took the smaller of the 90's, 8mm??

btw I have OZs on my Tuono, is that the same size ? God, I'm lazy.....

[weasel221]

btw I have OZs on my Tuono, is that the same size ? God, I'm lazy.....

ummm, just saw the 'OZ'... mine are Brembo's..but still have a small hole....








that doesn't sound right....lol

[tasi]

Like a ,well ,100 mm piece of rubber string that gets pushed through the hole .The plug and go will only fix a tiny nail hole .
You could use 3 strings for a large hole .(within reason )

[The Foreigner]

I have finally gotten an answer from the seller of them angled valves,

"
Hi, we sell 11,3mm valves as well as 8,3mm valves. I'm sorry but I don't know which diameter you need for the OZ rims.
Best regards"

So which ones do I go for ?

[BrummyMax]

8.3mm

[The Foreigner]

cheers, thanks Max

[RossGuzzi]

From memory you have to use a rubber washer and perhaps some silocone to seal the rear one, or the front. One of them is not machined flat on the inside.