Aprilia SR50R 08 - Spiderman Edition | MHR BigBore 86cc 50,00mm Cylinderkit | MHR Team Crankshaft | MHR EPROM Ignition | MHR M.A.C.S.I PowerBox | MHR VITON Manifold | MHR 28mm VHST Carburator | MHR E15 Powerfilter | MHR VentilVar | MHR VL16 Oversize Reed Valve | MHR BigBore Exhaust | MHR Overrange Team Multivar 2010 Variator @ 4g Dr.Pulley Rolls | Dr.Pulley HIT Clutch @ Green springs | Dr.Pulley 2010 ClutchBell | Malossi Blue 106% Contra-Spring | MHR Overrange Kevlar belt | Malossi Torsion Controller | MHR 13/48 Secondary Gearing | MHR HTQ 14/39 Primary Gearing | MHR Overrange Torque Drive | Kiesler Waterpump | MHR DENSO IW34 IRIDIUM Sparkplug | Nology "Hot-Wire" Sparkplug Wire
Thanks for the info. Lovely bike by the way![]()
Thank you
![]()
Aprilia SR50R 08 - Spiderman Edition | MHR BigBore 86cc 50,00mm Cylinderkit | MHR Team Crankshaft | MHR EPROM Ignition | MHR M.A.C.S.I PowerBox | MHR VITON Manifold | MHR 28mm VHST Carburator | MHR E15 Powerfilter | MHR VentilVar | MHR VL16 Oversize Reed Valve | MHR BigBore Exhaust | MHR Overrange Team Multivar 2010 Variator @ 4g Dr.Pulley Rolls | Dr.Pulley HIT Clutch @ Green springs | Dr.Pulley 2010 ClutchBell | Malossi Blue 106% Contra-Spring | MHR Overrange Kevlar belt | Malossi Torsion Controller | MHR 13/48 Secondary Gearing | MHR HTQ 14/39 Primary Gearing | MHR Overrange Torque Drive | Kiesler Waterpump | MHR DENSO IW34 IRIDIUM Sparkplug | Nology "Hot-Wire" Sparkplug Wire
Sp33d-fr34k, have you seen the new 2013 SR's? They have black tunnel covers and black foot pegs! Sweet looking.
Attachment 193605
The new SR's look nice!
Here's mine, some old pics though, I'll try get some new ones
2012-04-22-21.30.jpg
![]()
2009 Aprilia SR 50 R Factory Max Biaggi Replica De-restricted
Stock apart from the Giannelli Next Sports Exhaust, LED bulbs and matte black tunnel covers and pillion footpegs
2009 Aprilia SR 50 R Factory Max Biaggi Replica De-restricted
Stock apart from the Giannelli Next Sports Exhaust, LED bulbs and matte black tunnel covers and pillion footpegs
Hello their, I'm sure where I'm meant to post this answer because im new. But has anyone got a set of newshape sr50 panels? Be good if their in really good condtion, but I don't mind, More bothered about the lungs! Just erm reply to this please! would help alot. Thankyou.
Out off all the 4 sr's I've had ive always had a soft spot for the bancaja one , was the quickest stock sr I've had
sr50r (carb) 2010 alitalia
completely stock
Heres mine
![]()
Last edited by Charlie9668; 11-12-2012 at 01:15 PM.
Polini cast iron 70cc kit
Doppler endurance crank
Artek k2 variator kit
pm tuning race clutch
yazuni C16 exhaust
delorto 21mm carb
Charlie, this is why i'm subscribed to this thread, to see nice bikes like that.
How do you stop the mud guard from flapping on the wheel?
Thank you and I have put a cable tie through the hole for the bolt in the mud guard then around the rear shock (temporary adjustment), it still flaps around but im going to buy an aftermarket one soon
Polini cast iron 70cc kit
Doppler endurance crank
Artek k2 variator kit
pm tuning race clutch
yazuni C16 exhaust
delorto 21mm carb
vinly wrap ??
sr50r (carb) 2010 alitalia
completely stock
I have the same problem, and I tried that too, but my filter gets in the way and i dont really want to put too much pressure on that and the carb.