Results 1 to 3 of 3

Thread: Turn signal redoux

  1. #1
    apriliaforum Junkie deboRSV's Avatar
    Join Date
    Jun 2005
    Location
    Omaha, NE
    Posts
    256

    Turn signal redoux

    A little winter time boredom kicked in and decided to change a few things.

    Front signals/mirrors gone. Going with flush mount LED's and CRG bar end. Bar end looks goofy, but the stock ones gave a good view of elbows, so it really doesn't matter. Got the LED's more for switching back and forth for track. Bar end mirror easier to take on/off than the stock setup.





    Rear end needed the smoked set available from AF1. I like it better than the clear setup, especially on a black bike.






  2. #2
    apriliaforum prov-nov
    Join Date
    Mar 2012
    Location
    san francisco
    Posts
    51
    What brand/model are the front led's? Did they require modification?

  3. #3
    apriliaforum Junkie deboRSV's Avatar
    Join Date
    Jun 2005
    Location
    Omaha, NE
    Posts
    256
    They are from Hotbodies, for a Suzuki. I can't remember exactly which one, I think most of the suzuki ones are the same. I will see if I can find the actual part number. The reciept was floating around here for a while. I did have to adjust the holes a bit. When I just had the block off plates, the dremel worked fine. These have a bigger area that goes through the plastic (to get them flush mount), so it took a drill bit and the dremel to get them to fit. Nothing major, just a bit unnerving taking a dremel to it. The stock mirrors will still go back on if need be.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •