So I have the dyno graphs from some of my other runs. As per the second graph. The blue run is of the bike bone stock. The Red run is of the bike with a high flow air filter and race ecu think the stock exhaust. The Green run is the bike with the race ecu, high flow air filter, AR22 GP2 exhaust baffles out, and tuned with a PC5. I forgot to put on the sheet the run I did with the race ecu, high flow air filter, AR22 GP2 exhaust with 50mm baffles in, I got 161.91HP and around 74 ft. lbs. of torque.
Thanks for sharing, looks good! How much did you gain by mapping the PC5 after you had installed Race ECU and exhaust? How far off was the mapping without PC5?