Did any of you get asked to cancel the ebay purchase because of customisation of the fairings, because they don't want to be involved in a "not as described" claim?
Did any of you get asked to cancel the ebay purchase because of customisation of the fairings, because they don't want to be involved in a "not as described" claim?
mate
2010 RS125 Gloss Black
Arrow Exhaust (E Marked) | Moto Tassinari vForce3 Reed Block
2002 SR50 Morini Ditech Matte Black SBK Replica 50cc
Leo Vince GP can | 68cc Kit (Malossi) | Full Circle Crank (Malossi MHR HPC) | Primary gear kit (Malossi) | vForce2 reed block (Top Performances\Moto Tassinari) | 19mm bored throttle body
2002 SR50 Morini Ditech blue 50cc FOR SALE (daily rider) 100aprilias/hr (80km/h)
ECU "development mode" (apparently) | 19mm bored TB | Carbon reeds | Std. Variator | 6.0g Rollers [slightly heavy but good] (Malossi) | Std. Clutch | Red Contra Spring [Racing] (Malossi) | Blue Clutch Springs [Sport] (Malossi) | Custom Water Trap
Why Draftpunk?
What had happened to the fairings you have purchased?Originally Posted by Draftpunk
NO. I just ordered mine from the u.s. 2 weeks ago and havent heard anything. If this were the case why are they still for sale one ebay?
which Ebay seller did you guys actually liaise with? there are few who actually sell the parts. from my experience, Parts4bikes are pretty reasonable and pretty fast in responding and supplying the parts as described.
I bought mine from hksupersport which from what I can read is parts4bikes. They said that because it was a custom order they needed to cancel the ebay transaction as per my previous post.
2010 RS125 Gloss Black
Arrow Exhaust (E Marked) | Moto Tassinari vForce3 Reed Block
2002 SR50 Morini Ditech Matte Black SBK Replica 50cc
Leo Vince GP can | 68cc Kit (Malossi) | Full Circle Crank (Malossi MHR HPC) | Primary gear kit (Malossi) | vForce2 reed block (Top Performances\Moto Tassinari) | 19mm bored throttle body
2002 SR50 Morini Ditech blue 50cc FOR SALE (daily rider) 100aprilias/hr (80km/h)
ECU "development mode" (apparently) | 19mm bored TB | Carbon reeds | Std. Variator | 6.0g Rollers [slightly heavy but good] (Malossi) | Std. Clutch | Red Contra Spring [Racing] (Malossi) | Blue Clutch Springs [Sport] (Malossi) | Custom Water Trap
Parts4bike is who i purchased mine from. Maybe because it was custom bodywork, i bought the blue Fiat bodywork that they have listed on ebay so i will let you know if/when it arrives. Give them your email address, maybe they will do the transaction away from ebay, like i did. Mine was a little cheaper too.
that's true. i made my order out of eBay and i have been ordering quite a bit as well. normally these sellers are quite reasonable but do make an effort to pay using paypal to safeguard your money and the transactions.
So I received my fairings. Much quicker than the 6 weeks to USA. They are good for what you pay for them.
Mine had an indent on one of the side main fairings, possibly from the moulding process and the front wheel fairing had scratches on it. I haven't tried to mount them yet, so I will update this when I have for the score.
Finish 8/10
Quality Assurance 6/10
Packaging 10/10
Overall 8/10 (I have high expectations).
2010 RS125 Gloss Black
Arrow Exhaust (E Marked) | Moto Tassinari vForce3 Reed Block
2002 SR50 Morini Ditech Matte Black SBK Replica 50cc
Leo Vince GP can | 68cc Kit (Malossi) | Full Circle Crank (Malossi MHR HPC) | Primary gear kit (Malossi) | vForce2 reed block (Top Performances\Moto Tassinari) | 19mm bored throttle body
2002 SR50 Morini Ditech blue 50cc FOR SALE (daily rider) 100aprilias/hr (80km/h)
ECU "development mode" (apparently) | 19mm bored TB | Carbon reeds | Std. Variator | 6.0g Rollers [slightly heavy but good] (Malossi) | Std. Clutch | Red Contra Spring [Racing] (Malossi) | Blue Clutch Springs [Sport] (Malossi) | Custom Water Trap
Mine turned out decent. the gas tank cap was hard to get on without scratching the paint on the tank. some of the bolt holes didnt line up very good but for the price its worth it! i would buy from "partsforbike" on ebay again
there are many colour choices these days...
http://www.ebay.com/itm/ABS-bodywork...item3f1adc0d69
http://www.ebay.com/itm/ABS-bodywork...item416942fea4
http://www.ebay.com/itm/ABS-bodywork...item416942feb6
http://www.ebay.com/itm/ABS-bodywork...item41696e3ec9
http://www.ebay.com/itm/ABS-bodywork...item3f1afe0e9e
http://www.ebay.com/itm/ABS-bodywork...item3f1afe0f53
http://www.ebay.com/itm/ABS-bodywork...item3f1afe0f6e
http://www.ebay.com/itm/ABS-bodywork...item41696e4137
http://www.ebay.com/itm/ABS-bodywork...item416942fecb
http://www.ebay.com/itm/ABS-bodywork...item41696e3fab
http://www.ebay.com/itm/ABS-bodywork...item41696e3ffb
My Italian garage:
201? RSV4 Factory APRC or BMW F32.
2011 RS125 - Modified CDI (FP Euro 2), Evotech tail tidy & exhaust hanger, Talon alloy sprocket, SSS hd chain.
2009 Shiver 'Factory APRC' - OEM Screen, CF panels & fender, DNA air filter, PC Flo oil filter, Pazzo levers, Akra slip-ons, LV decat, NGK Iridium, 16/45 Afam/Superlite sprockets, EK X-ring gold, Skidmarx hugger, Evotech tail tidy, LSL fatbar & sliders, HLD seat cover, clear clutch cover & protector, Samco hoses, Barracuda LED, MFW Vario footpegs, Fatduc O2 manipulator, brake lever guard, Rosso II.
2008 Cagiva Mito 125 - Fully derestricted and loaded with $pecial parts.
Posting Permissions
Reply With Quote
