Could somebody that has a Malossi 2000 Variator for Piaggio please let me know it's diameter?
This is a picture of a V2008 of which I know the diameter. Thank you for your help.
Attachment 188480
Could somebody that has a Malossi 2000 Variator for Piaggio please let me know it's diameter?
This is a picture of a V2008 of which I know the diameter. Thank you for your help.
Attachment 188480
I will get the specs on mine tomorrow.
Thanks Rosscofat
The 2000 and 2008 should be the same dia. Only the hub was chasnged
2007 SR50 R Factory Ditech Diablo Black & HGT Orange
26mm BING Throttle Body / Airsal T6 Racing 70cc BBK = 64.9cc displacement / Malossi ECU / Malossi HPC Full Circle Crankshaft / Malossi Multivar 2000 / Malossi Special belt / 4.0gr Dr. Pulley / Malossi White Contra Spring / Malossi Delta Race Clutch / Malossi MHR VL14 Reed Block / Engine Block Matched Ported and Polished
Correct. The V2008 hub is 2 mm larger than the Malossi 2000. It's also 99.5mm in diameter.Originally Posted by High-Gain SR50
I measured the stock Piaggio variator and it's 1.5mm smaller.
Is there any reason why you need the size?
I'm trying to verify if its the same diameter as the stock Piaggio Variator or the V2008.
Malossi doesn't specify like they do with the V2008.
Which belt are you using with your 2000?
I am still stock with the Belt. Not changed yet. I will get the length now
Posting Permissions
Reply With Quote
