Flyhammer Mode Switch

[bn1]

Im after a Flyhammer mode switch for my 09 Factory trackbike.

I see AF1 have the APRC switches listed but im after just the 3 button mode switch for the non APRC.

Ive checked flyhammers site which is in italian and can see some V4 parts but no mode switches.

Anyone have any info on these switches and where I can get one from?

[Joeh2o]

http://www.aviorace.it/

[bn1]

http://www.aviorace.it/

Cheers but im really after the flyhammer one as its plug and play

[Ed / AF1 Racing]

be very careful ordering direct....our last order had to be hunted down.....there is one guy that converts the aviorace unit to the plug n play aprilia for TRD/flyhammer people. He ran off with TRD's money and our parts. He had to be hunted down to get our last order out....big mess

I dont know what is going on over there....wish they could supply them faster.

[Joeh2o]

be very careful ordering direct....our last order had to be hunted down.....there is one guy that converts the aviorace unit to the plug n play aprilia for TRD/flyhammer people. He ran off with TRD's money and our parts. He had to be hunted down to get our last order out....big mess

I dont know what is going on over there....wish they could supply them faster.

yes it is true.
------------------
But to put a connector on the run stop switch to have plug & play sistem it is very very easy.
It is not difficult like APRC control.
It is only a AMP connector 4 pin...

[Joeh2o]

let me suggest an alternative
http://www.diapasonracing.com/d-news/
They are official supplyer of Yamaha....very serious people

I don't know if the buy the swich from Aviorace or product them himself...

[bn1]

be very careful ordering direct....our last order had to be hunted down.....there is one guy that converts the aviorace unit to the plug n play aprilia for TRD/flyhammer people. He ran off with TRD's money and our parts. He had to be hunted down to get our last order out....big mess

I dont know what is going on over there....wish they could supply them faster.

Ed if thats the case I think i'll be better off ordering a switch from somewhere else and trying to wire it to work.

Like this one on ebay

http://www.ebay.co.uk/itm/3208457799...84.m1438.l2649

Has anyone on here already done this sucessfully and got any tips or wiring diagrams? Also any links to where I can get the same OE connectors as id rather try to make it plug and play rather than butchering the original switch.

Im not an electrician but surely it cant be that difficult as its for my trackbike I only need the mode switch.

These are still clearly in demand there must be someone else who could start converting these switches to be plug and play.

Any more help well be much apreciated

Tom

[Joeh2o]

I can help you telling that you will need 2 kind of connector to make the same FHammer switch.
One of them you can find here (I ve never phisically matched them with OEM connectore ...but I belive they are the same)

http://stores.ebay.it/AutoStar-Shop/...=p4634.c0.m322


For the other one I can't help you.

[bn1]

Right guys thanks for everyones help much appreciated.

I ordered myself a SCM switch from Tony @ http://www.motodex.eu/



I received the switch the other week and today I managed to get it on the bike to make sure it was wired correctly.

So its now on and working perfectly.

I went for the 5 button over the 3 as I preferred the look but having the 09 Factory I only needed the 3 really as I only require 3 buttons for the mode switch.



I wired it to the 3 momentary switches : White TC+ = Up : Blue TC- = Down : Yellow = Select

It was pretty straight forward to connect up and for those that may wish to know I could do a little how to with pics...

Obviously this is for the non APRC bikes, mode switch only.

[Quarantine]

^^
Nice

[Eape]

I don't see it on their site.

[bn1]

I don't see it on their site.

They're not up on the website, drop him an email @ ceo@motodex.de if you want one and say I (Tom) gave you his details. Hes got them in stock.

He should give you a good price and you shouldn't have to pay VAT

[Eape]

bn1, thanks that's great info.

[hakanj]

Thought I'd share a connection I used today for the APRC buttons. It seems to work fine, at least in the garage.

[LewRSV4]

*warning really stupid question*

Where is the clutch lever?

Also, those 5 buttons look fecking amazing!