Wheres the best place to advise and buy Ohlins fork springs from?
Thanks
Wheres the best place to advise and buy Ohlins fork springs from?
Thanks
I'd simply call this guy toll-free. He's the man in the USA w/Ohlins & is the largest dealer in the USA. He can answer all questions and support the advice on what will be needed in your application. I also have a Kawasaki ZRX 1100, and he is well known and used by forum members at ZRXOA.org
http://www.shop.kyleusa.com/category.sc?categoryId=58
Or purchase them through AF1:
http://www.af1racing.com/store/Scrip...idproduct=4597
Hope that helps !
Last edited by FAST LION; 03-30-2012 at 10:02 AM.
Current rides:
2000.5 Aprilia RSV Mille R
2000 Kawasaki ZRX 1100
2002 KTM Duke II
1982 Husqvarna 430 XC
Previous rides:
1994 Harley Davidson Fat Boy FLSTF
1989 Harley Davidson 883 Sportster
1986 Yamaha FZ600
1985 Suzuki GSXR 750
1982 Kawasaki GPZ 550
1979 Yamaha RD400 Daytona
1979 Honda XR80
1978 Husqvarna 250 OR
+1 on dan kyle...
hes a salesman tho, be careful
2002 Mille-R Euro Yellow, Full Ti Akra, Evo Airbox, Custom Factory Pro Chip, Full Braking Rotors, Brembo RCS Clutch + Brake, Kyle Racing Tuned Ohlins and Custom TTX Rear, 03 Custom Tail, Sato 2 Rearsets, Quickshifter, Spiegler Lines, MPL Slave, Ceramic Bearings, Factory Pro Shift Star, 16/44 Gearing, Tons of extra carbon.
Plus 2 on Kyle. He's pretty-much Ohlins only now, did an Ohlins spring upgrade in my bud's Tuono Showa and it's awesome.
No Matter Where You Are, There You Go!
I just got a new set for my Mille, as well as a new Penske shock for my Gixxer, from Rick at Cogent Dynamics. Rick is simply the ONLY guy I deal with in suspension, and typically gives better pricing that anyone else...
Tell him meantrk sent ya. Most popel get a few bucks off that way!
motocd.com
Ron
MSgt USMC (Retired!)
Semper Fi!
Nesba A #45
IBA #38812
RST Futura
Colin Edwards RSV R Mille #066
RS50
For custom paint work, check out http://www.trading-paint.com
He's probably looking for something a little closer to home.
STM Suspension in Fort Collins Colorado -
Ships internationally and does fantastic suspension work.
Dave, the owner, has a degree in mechanical engineering with an emphasis in Vehicle Dynamics. He's been working with my race effort for the last several years and always finds a way to make my bike go faster / easier. I know he's been doing some consulting over the phone about spring rates and I'm sure that he can help you out. He used to own a first gen. Mille - so he knows that bike well.
www.stmsuspension.com
The world is a click away
Thanks for all the input
Posting Permissions
Reply With Quote
