hey guys
i have an aftermarket penske shock on my rs250 but the rear end feel very low. does anyone uses a different rear shock link to jack up the rear end.
thanks
sami
hey guys
i have an aftermarket penske shock on my rs250 but the rear end feel very low. does anyone uses a different rear shock link to jack up the rear end.
thanks
sami
Have you verified that the shock is the correct size?
Richard
AMA #3 XR1200 | WSMC #800 | WERA #800
www.MotoList.com
2000 Aprilia RS250 Race
2002 Aprilia RS250 Street
2000 Aprilia RS250 Cup
'85 RZ500
'84 RZ350 Kenny Roberts
'88 RGV250 Pepsi Schwantz
'92 NSR250SP Kocinski
'84 NS400R Rothmans
'92 RS125
'92 TZ250
Bunch of Ducatis
Hey Sami,
I have Ninja250R links on my RS250 which are 5mm shorter (see above). I only rode it once at Eastern Creek Raceway after putting them in. It raised the back end up about 20mm, but ruined the handling of the bike. It took the whole day to adjust the suspension to get a decent feel back, but I will be removing them to put standard links back in. I am also running Sugaya chambers and had to space them out wider to clear the swingarm and chain. I wouldn't recommend doing this.
-Grotty.
Two-smoking Barrels!!
It exists a 25mm shorter version of the rear shock link but it would feel veeeery lower than std one.
isnt the shock have height adjustment?
Also preload of your spring will change the feel