Technoresearch diagnostic for RSV4 IAW 7SM

[mikef4uk]

Try to press the 'Channel' icon.
You are now able to choose a lot of different channels, and there might be another channel that will make more sense for your TPS.
My battery-indicator is showing 1566volts, which is incorrect :-)
When I change this channel to 'battery-recovery' it shows the correct value.

Mine is the same, I suspect the battery voltage is still in digital/binary?

The throttle plates and not the twistgrip open and close when the ignition is turned on then default to around 6% open, hence the rev when you start the bike, my power commander also shows thiis when connected

[potere]

Off to the bike with laptop again..thx for the ideas aarfeldt.

Mike, that 6% idea makes sense. Aarfeldt, do you run non-stock settings for the stepper maybe and thus have a 0 degrees?

[aarfeldt]

Aarfeldt, do you run non-stock settings for the stepper maybe and thus have a 0 degrees?

Well...I do use a special made race map from ApriliaRacing...maybe that's why I see another reading...guessing here :-)

[potere]

Technoresearch says 6.4 degrees is a bit on the high side but within what he sees for this engine.

Here's a gotcha for those with Win 7 Ultimate, he also said the software will not run on this version of the OS. Compatibility mode changes do nothing, he even uploaded a special version of the program, no workey. Few people, fortunately, run this version. I got it because it allows you to choose any of 35+ languages for your interface.

[aarfeldt]

Here's a gotcha for those with Win 7 Ultimate, he also said the software will not run on this version of the OS.

Try VirtualBox, and run a supported OS as guest-OS.

[mikef4uk]

Off to the bike with laptop again..thx for the ideas aarfeldt.

Mike, that 6% idea makes sense. Aarfeldt, do you run non-stock settings for the stepper maybe and thus have a 0 degrees?

Normally the throttle shows '0'% as soon as you start the bike

[potere]

The support guy says to expect 4-6 degrees (it's not percent on the display) . If yours is a regular race map and shows 0 when you start the bike, we have a big discrepancy going on.

[tomik]

I have Windows 7 Ulitmate 64-bit and Technoresearch software is running fine. No compatibility mode settings used. Go figure...

[potere]

I have Windows 7 Ulitmate 64-bit and Technoresearch software is running fine. No compatibility mode settings used. Go figure...

Ma voin sanoa vaan, helvetti paskaa tata software

[mrmike_14]

Hi everybody

Can you tell me if it is now possible to calibrate the twist grip demand sensor, TPS and exhaust flap?
Or which functions does the tool support for the rsv4 factory - is it worth to buy it?

[aarfeldt]

It's primary a diag-tool that also can reset errors.