Page 6 of 24 FirstFirst ... 4567816 ... LastLast
Results 76 to 90 of 348

Thread: 86cc Malossi Replica Build... In progress

  1. #76
    apriliaforum expert TheChef's Avatar
    Join Date
    Aug 2010
    Location
    Surrey,B.C
    Posts
    772
    where did The white shock come from?
    Last edited by High-Gain SR50; 09-02-2011 at 11:01 PM.
    09 SR Factory
    "Boo"
    Malossi BBK
    2.8.0 ECU LEOVINCE ZX-R ZMR7AP .035
    MALOSSI Multivar 2000 Yellow BGM clutch springs Green contra spring Reeds VL13
    8gm Dr Pulleys Husky Watertrap
    Gen III Adjustable High Gain Tuning Regulator 118psi
    Woodruff key BGM pod filter
    Fuel pump fix 40mm riser Stretch kit
    110kph.

  2. #77
    Aprilia Forum Moderator High-Gain SR50's Avatar
    Join Date
    Jun 2008
    Location
    Parker Colorado
    Posts
    11,859
    I'm thinking to give it that black taped over look on the lenses that I paint the insides of the housings black then install super bright LED bulbs. That way they will look blackened out until they are on then WOW!
    2007 SR50 R Factory Ditech Diablo Black & HGT Orange







    26mm BING Throttle Body / Airsal T6 Racing 70cc BBK = 64.9cc displacement / Malossi ECU / Malossi HPC Full Circle Crankshaft / Malossi Multivar 2000 / Malossi Special belt / 4.0gr Dr. Pulley / Malossi White Contra Spring / Malossi Delta Race Clutch / Malossi MHR VL14 Reed Block / Engine Block Matched Ported and Polished

  3. #78
    Aprilia Forum Moderator High-Gain SR50's Avatar
    Join Date
    Jun 2008
    Location
    Parker Colorado
    Posts
    11,859
    Quote Originally Posted by TheChef View Post
    where did The white shock come from?
    Front or back?
    2007 SR50 R Factory Ditech Diablo Black & HGT Orange







    26mm BING Throttle Body / Airsal T6 Racing 70cc BBK = 64.9cc displacement / Malossi ECU / Malossi HPC Full Circle Crankshaft / Malossi Multivar 2000 / Malossi Special belt / 4.0gr Dr. Pulley / Malossi White Contra Spring / Malossi Delta Race Clutch / Malossi MHR VL14 Reed Block / Engine Block Matched Ported and Polished

  4. #79
    apriliaforum expert TheChef's Avatar
    Join Date
    Aug 2010
    Location
    Surrey,B.C
    Posts
    772
    Back.
    09 SR Factory
    "Boo"
    Malossi BBK
    2.8.0 ECU LEOVINCE ZX-R ZMR7AP .035
    MALOSSI Multivar 2000 Yellow BGM clutch springs Green contra spring Reeds VL13
    8gm Dr Pulleys Husky Watertrap
    Gen III Adjustable High Gain Tuning Regulator 118psi
    Woodruff key BGM pod filter
    Fuel pump fix 40mm riser Stretch kit
    110kph.

  5. #80
    Aprilia Forum Moderator High-Gain SR50's Avatar
    Join Date
    Jun 2008
    Location
    Parker Colorado
    Posts
    11,859
    2007 SR50 R Factory Ditech Diablo Black & HGT Orange







    26mm BING Throttle Body / Airsal T6 Racing 70cc BBK = 64.9cc displacement / Malossi ECU / Malossi HPC Full Circle Crankshaft / Malossi Multivar 2000 / Malossi Special belt / 4.0gr Dr. Pulley / Malossi White Contra Spring / Malossi Delta Race Clutch / Malossi MHR VL14 Reed Block / Engine Block Matched Ported and Polished

  6. #81
    apriliaforum expert TheChef's Avatar
    Join Date
    Aug 2010
    Location
    Surrey,B.C
    Posts
    772
    Same height as stock?
    09 SR Factory
    "Boo"
    Malossi BBK
    2.8.0 ECU LEOVINCE ZX-R ZMR7AP .035
    MALOSSI Multivar 2000 Yellow BGM clutch springs Green contra spring Reeds VL13
    8gm Dr Pulleys Husky Watertrap
    Gen III Adjustable High Gain Tuning Regulator 118psi
    Woodruff key BGM pod filter
    Fuel pump fix 40mm riser Stretch kit
    110kph.

  7. #82
    Aprilia Forum Moderator High-Gain SR50's Avatar
    Join Date
    Jun 2008
    Location
    Parker Colorado
    Posts
    11,859
    I think it's 300mm.

    The one on the scoot now is for sale cheap...
    2007 SR50 R Factory Ditech Diablo Black & HGT Orange







    26mm BING Throttle Body / Airsal T6 Racing 70cc BBK = 64.9cc displacement / Malossi ECU / Malossi HPC Full Circle Crankshaft / Malossi Multivar 2000 / Malossi Special belt / 4.0gr Dr. Pulley / Malossi White Contra Spring / Malossi Delta Race Clutch / Malossi MHR VL14 Reed Block / Engine Block Matched Ported and Polished

  8. #83
    apriliaforum prov-nov scooterlife1's Avatar
    Join Date
    Aug 2011
    Location
    lutherville md
    Posts
    76
    hm idk in my opinion my sr is faster then any 50 or 70cc scoot round here so im good with this speed, im more liking the looks right now! did you paint yourslef?

  9. #84
    Aprilia Forum Moderator High-Gain SR50's Avatar
    Join Date
    Jun 2008
    Location
    Parker Colorado
    Posts
    11,859
    No, I had a professional painter do it. Base coat / clear coat.
    2007 SR50 R Factory Ditech Diablo Black & HGT Orange







    26mm BING Throttle Body / Airsal T6 Racing 70cc BBK = 64.9cc displacement / Malossi ECU / Malossi HPC Full Circle Crankshaft / Malossi Multivar 2000 / Malossi Special belt / 4.0gr Dr. Pulley / Malossi White Contra Spring / Malossi Delta Race Clutch / Malossi MHR VL14 Reed Block / Engine Block Matched Ported and Polished

  10. #85
    apriliaforum expert MeepMeep's Avatar
    Join Date
    Jul 2008
    Location
    Mass
    Posts
    1,993
    Quote Originally Posted by High-Gain SR50 View Post
    I'm thinking to give it that black taped over look on the lenses that I paint the insides of the housings black then install super bright LED bulbs. That way they will look blackened out until they are on then WOW!
    thats is a killer idea.... the back ones are blacked out too but itd be harder to get those as bright id imagine....
    2009 SR50R Factory diablo white

    Currently getting the HGT replica WORKS!

    2002 SR50 Ditech Haga SBK replica
    70cc malossi BBK w/ecu
    blue aprilia 7075 ergal bolt kit
    blue aprilia 7075 ergal bar ends
    malossi delta clutch
    malossi reed block
    Aprilia Paoli adjustable shock
    Installed Pussy Magnet

  11. #86
    apriliaforum expert shrubman's Avatar
    Join Date
    Nov 2008
    Location
    Athens, Georgia USA
    Posts
    1,177
    I thought this one wasn't going to have lights, due to the inner rotor ignition.
    Shrubman

    2009 SR50 R Factory


    Engine:
    HGT PFI Conversion
    HGT-Modded Bing 26mm Throttle Body
    Malossi 86CC Cylinder
    Malossi MHR Big Bore Exhaust
    Malossi VL13 Reed Valve
    Pro Porting Intake Manifold and Spacer
    Pro Porting Double Layer "Air Plus" Air Filter

    Transmission:
    Malossi Multivar 2000 MHR Team (2008 Model)
    Malossi 14/39 Primary Gears
    Malossi Delta Clutch
    Malossi Kevlar Belt

    Other:
    Stage 6 Adjustable Shock Riser
    HGT Billet Aluminum Brake Levers
    Buzzetti Side Stand
    Motorkit Rear Hugger

  12. #87
    Aprilia Forum Moderator High-Gain SR50's Avatar
    Join Date
    Jun 2008
    Location
    Parker Colorado
    Posts
    11,859
    The inner rotor ignition has a small charging coil... May be just enough for the PFI requirements so lights will have to be all LED
    2007 SR50 R Factory Ditech Diablo Black & HGT Orange







    26mm BING Throttle Body / Airsal T6 Racing 70cc BBK = 64.9cc displacement / Malossi ECU / Malossi HPC Full Circle Crankshaft / Malossi Multivar 2000 / Malossi Special belt / 4.0gr Dr. Pulley / Malossi White Contra Spring / Malossi Delta Race Clutch / Malossi MHR VL14 Reed Block / Engine Block Matched Ported and Polished

  13. #88
    apriliaforum expert Culverin's Avatar
    Join Date
    Nov 2009
    Location
    Vancouver, BC, Canada
    Posts
    1,229
    So definitely not enough to power an HID setup?
    SR50 R Factory / 2009 / Piaggio Purejet
    General
    Restrictions: Removed / Tires:
    Michelin Pilot Sport SC 130/60-13 (front and rear) w/ 2.0g dynabeads / Rider Weight: 56.7kg (125lbs)

    Performance
    ECU: unknown Version and Mapping
    Spark: NGK ZMR7AP (gapped to approx. 0.037mm)

    Exhaust: LeoVince GP, silencer removed
    Variator: Malossi Multivar 2008 w/ 6.0g DP sliders
    Contra Spring: Malossi Purple w/ Malossi Torsion Control + Stock Piaggio TC (clutch side).
    Clutch: Malossi Delta / Yellow Clutch Springs (7250 rpm engagement according to this table) / Wing Clutch Bell
    Reed Cage: Malossi VL13 (stuffer removed)

    Status

    - Clutch might still be engaging too soon? Too late? Not really sure?
    - Off-the-line lag is gone. woot.

  14. #89
    Aprilia Forum Moderator High-Gain SR50's Avatar
    Join Date
    Jun 2008
    Location
    Parker Colorado
    Posts
    11,859
    Not at all...
    2007 SR50 R Factory Ditech Diablo Black & HGT Orange







    26mm BING Throttle Body / Airsal T6 Racing 70cc BBK = 64.9cc displacement / Malossi ECU / Malossi HPC Full Circle Crankshaft / Malossi Multivar 2000 / Malossi Special belt / 4.0gr Dr. Pulley / Malossi White Contra Spring / Malossi Delta Race Clutch / Malossi MHR VL14 Reed Block / Engine Block Matched Ported and Polished

  15. #90
    Aprilia Forum Moderator High-Gain SR50's Avatar
    Join Date
    Jun 2008
    Location
    Parker Colorado
    Posts
    11,859
    Some pics from Snugg's Canon.

    .
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Img_3344.jpg 
Views:	26 
Size:	270.9 KB 
ID:	170020  

    Click image for larger version. 

Name:	Img_3345.jpg 
Views:	16 
Size:	271.1 KB 
ID:	170021  

    Click image for larger version. 

Name:	Img_3364.jpg 
Views:	16 
Size:	256.1 KB 
ID:	170023  

    Click image for larger version. 

Name:	Img_3367.jpg 
Views:	23 
Size:	289.3 KB 
ID:	170024  

    Click image for larger version. 

Name:	Img_3356.jpg 
Views:	27 
Size:	264.6 KB 
ID:	170026  

    Click image for larger version. 

Name:	Img_3393.jpg 
Views:	19 
Size:	245.1 KB 
ID:	170027  

    2007 SR50 R Factory Ditech Diablo Black & HGT Orange







    26mm BING Throttle Body / Airsal T6 Racing 70cc BBK = 64.9cc displacement / Malossi ECU / Malossi HPC Full Circle Crankshaft / Malossi Multivar 2000 / Malossi Special belt / 4.0gr Dr. Pulley / Malossi White Contra Spring / Malossi Delta Race Clutch / Malossi MHR VL14 Reed Block / Engine Block Matched Ported and Polished

Page 6 of 24 FirstFirst ... 4567816 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •