No, i have'nt been doing much on the bike. Still waiting on the starter solenoid. Have to get new handlebar mounts and bolts. Got a few needed parts in the mail too. But, it's coming along slowley.
No, i have'nt been doing much on the bike. Still waiting on the starter solenoid. Have to get new handlebar mounts and bolts. Got a few needed parts in the mail too. But, it's coming along slowley.
Polished the intake and made all the wiring tidy.
Got the starter solenoid, fitted it. Next i need to get a battery. i've got a fast action domino throttle and a front brake master cylinder on the way in the mail. I need to get new bar raiser mounts for the last ones where destroyed with a grinder
so should be running soon yerr?and how did you destroy them with a grinder
Engine Always Screaming!
Its Not What You Ride Its How You Ride It
The Beast should be running soon. I used a car battery to turn the engine over, it has spark. I used stainless bolts on the bar mounts and they would'nt come undone so i had to cut them off, i need to use high tensile next time.
video of the first start and ride!?.... when it goes
Its Not What You Ride Its How You Ride It
Will doOriginally Posted by chrism15
video of the first start and ride!?.... when it goes
I am always waiting on more picture of that project, especaily now RonneBear has got a new camera
I am always waiting on more picture of that project, especaily now RonneBear has got a new camera
Aprilia rs 50 2000
Top performance Pink 75cc
Doppler Endurance crankshaft
Arrow racing exhaust with carbon endcan
Dellorto 21mm carb(92 main jet)
Stock air box modded
Top performance Cdi
Malossi reed block 0.30mm
Conti race clutch kit
14/47 Gearing
Mono rear
Michelin pilot sport tyres
Rs 125 front master cyilinder
Malossi upgraded clutch springs
Rs 125 Headlight
UPGRADES to come
24mm mikuni flatside carb
Double bubble screen
Yasuni R3 exhaust
Gear indicator
Custom rearsets
Full respray and frame polish
Doppler air rear shock
Spraying the bars gold, then i'll get bolts next weeks to attach them. I got new bar mounts too because i had nuts spacing them up because i cut them too short. Should have the front end done soon. I have to get some oil, reeds and jets then i'll have it running.
did you put a new top yoke on it to house the clamps for the new bars or did you drill into the excisting yoke and bolt the clamps on like that?
take it you have longer brake hose to reach the bars without stretching
cant wait to see this thing in action
Its Not What You Ride Its How You Ride It
waiting for more pictures...
The top yoke was already drilled for the bar clamps. I bought new stainless brake lines, i did get abit upset when i realised the front one wont reach anymore. I'll have to get another front brake line and i still need to make a adaptor plate for the brake caliper to attach to the fork. I'll get more pics up soon, when i get the bars on
Aaaarrrggh.... to long with out pictures.....
Posting Permissions
Reply With Quote