Results 1 to 7 of 7

Thread: rsv4 cutting out probs

  1. #1
    apriliaforum Junkie john boy's Avatar
    Join Date
    Oct 2008
    Location
    dorset
    Posts
    364

    rsv4 cutting out probs

    hi peeps hope you may be able to help,got a v4 in at the min it is cutting out arround 6000rpm,does not matter if you open throttle hard or slow when it goes past 6000rpm it has a miner what fills like ignition cut,not to bad on road but notice allot on dyno,cheqe all wire's seem ok fuel pipe's ok etc,going to put on navagator and record some data 2morrow i hope,i hope this may show up some kind of direction to go in,any thoughts or peeps had this prob before, thanks

  2. #2
    apriliaforum expert DuctTape's Avatar
    Join Date
    Jul 2010
    Location
    USA
    Posts
    642
    Mine does it and it has since I rode it home. I've been told it's from the shower injectors kicking in and since I'm going to upgrade to a full Austin Racing exhaust and Aprilia Race ECU I've not worried about it even though it is very, very annoying becuase it bucks both on and off the throttle as you pass 6000 RPM's.
    2011 KTM 990 Adventure ( Highly Modified)
    2010 RSV4 Factory ( Highly Modified)
    2010 Ducati 1198S (Highly Modified)
    2000 FLHRCI (Sleeper)

  3. #3
    apriliaforum prov-nov
    Join Date
    Aug 2010
    Location
    San Francisco, CA
    Posts
    55
    I've read about this problem being limited to the R models and not the Factory ones. Looks like DuctTape owns a Factory, so it looks like all models! Damn.

  4. #4
    apriliaforum expert DuctTape's Avatar
    Join Date
    Jul 2010
    Location
    USA
    Posts
    642
    Yup, I have the factory and the buck. The dealership I got it from even mentioned it when I showed up toget her and it's my understanding the lag/buck is due to the the one set of injectors shutting off and the shower injectors kicking in.
    2011 KTM 990 Adventure ( Highly Modified)
    2010 RSV4 Factory ( Highly Modified)
    2010 Ducati 1198S (Highly Modified)
    2000 FLHRCI (Sleeper)

  5. #5
    apriliaforum newb
    Join Date
    Nov 2009
    Posts
    22
    The bike is not supposed to cut out at 6k. The original engine in my RSV4 did not do that, but the replacement engine would pause at 6k rpms, after a month in the shop, and new throttle boddies, the bike was good.
    Last edited by Blackczar; 09-15-2010 at 07:57 PM.

  6. #6
    apriliaforum prov-nov leeschmidt's Avatar
    Join Date
    Jun 2010
    Location
    waterbury ct.
    Posts
    57
    i have a factory and never had that issue bike runs awesome

  7. #7
    apriliaforum Junkie rsvdan's Avatar
    Join Date
    Jan 2006
    Location
    West Sussex UK
    Posts
    295
    Have a read here John Boy or PM me

    http://www.apriliaforum.com/forums/s...d.php?t=212845

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •