Do you need any special tools to re-spring and re-valve the ohlins or should the local shop be able to use the tools they already have.
Do you need any special tools to re-spring and re-valve the ohlins or should the local shop be able to use the tools they already have.
your dealer will need the ohlins fork cap tool, it is a standard tool from any ohlins forks
Yeah...you should have sent them to Clarkie
Or you could send them to Clarkie and have him load them with the GP Suspension and use the $150 you saved on a new Evo slave cylinder!
Give Dan a call (831) 394-1330 or (866) 667-4925 at www.kyleusa.com He sells the proper fork cap removal tool at half the cost from ohlins ($50). If you really want to be a redneck you can use your preload nut too but.....You'll also need a tq wrench in the 200+inlbs range.
Chuck B
Arizona
Posting Permissions
Reply With Quote