I have been wondering how to post a pic, then write a bit, then another pic, write a bit and so on.
I try to seperate them, but it just dosnt work. It always comes out like all writing and then the pics.
The same question with with quotes.
just trying to get more post savvy !
Who said you get slower as you get older!
After you upload all the pics you want, close out the pop-up window and click the "Paperclip Button"again. This time it will come up with a list of all your attached pics. You can click on the one you want to insert, and it will pop it in and allow you to type before & after it, then just click on the next one you want. Or you can just "[insert all" and organize them how you want them once they are all in.
It does get kinda confusing tho, because in the "Attachments List" your pics are named the same as they are on your computer, but once you insert them, the name changes to just a number, so don't know what one is what. But that is where the "Preview Post" button comes in handy.
The other way is to upload your pics to Photobucket or another similar site, and just use the "Insert Image"button. This will basically copy the image from the other site, and again you can easily type before and after the code.
Edit: Added pics
Last edited by Lttlcheeze; 01-25-2010 at 08:16 AM.
'03 Falco Bought New on 4/6/07:
Custom paint, Powder Coated RSV Swing arm, RSV Shock, Anodized Rear Sets, Ti Hardware, Anodized (Blue) Fork Caps, SL Carbon Cans, SL Carbon Chip, Custom Airbox w/ K&N Filter, Evo Clutch Slave Cyl., CF Front Sprocket Cover, Rear Hugger, & Chain Guard, GP Shifter, Tuono Rear Brake Master Cly., Evo Clutch Slave Cly., Evo Fender Eliminator, RSVR Mirrors (custom mounts), Custom Blue Dash, HID Headlight, Smoked Tail Light Lens, Integrated Turn Signals into Taillight, LEDs in Headlight & Taillight, LEDs Thru-out, SuperSprox +2 Rear Sprocket, Ariete Grips... (i'm sure there is more)
Bill
Thasnks mate!
Who said you get slower as you get older!
Oh and the breaking up quotes...
The "Multi-Quote This Message"button allows you to quote multiple ppl in one post and you can type between them. It even works from multiple pages, so if you want to quote 2 ppl, one is on page one and the other on page 3, just click the Multi-Quote button on the one on page one, then goto page 3 and do the same (no specific order) then hit the
button.
If you want to break up one quote and put your responses between...
Quote them like you normally would, then copy and paste the text as you want it (I.E. Question then Answer) then just highlight their text and click theButton. It will put a [ QUOTE ] & [ /QUOTE ] around the text and it will apear as a Quote.
'03 Falco Bought New on 4/6/07:
Custom paint, Powder Coated RSV Swing arm, RSV Shock, Anodized Rear Sets, Ti Hardware, Anodized (Blue) Fork Caps, SL Carbon Cans, SL Carbon Chip, Custom Airbox w/ K&N Filter, Evo Clutch Slave Cyl., CF Front Sprocket Cover, Rear Hugger, & Chain Guard, GP Shifter, Tuono Rear Brake Master Cly., Evo Clutch Slave Cly., Evo Fender Eliminator, RSVR Mirrors (custom mounts), Custom Blue Dash, HID Headlight, Smoked Tail Light Lens, Integrated Turn Signals into Taillight, LEDs in Headlight & Taillight, LEDs Thru-out, SuperSprox +2 Rear Sprocket, Ariete Grips... (i'm sure there is more)
Bill
THanks LC !
I needed that as well....hard to believe there was no internet even when I was in college....in the 40's!!!
gr
Since it was highly recommended, I put THEGEEK on ignore and the forum IS a much nicer place!!
Good info,Lttlcheeze-I, too never knew how that was done (picture, text, picture) . . .Originally Posted by ghostrider71
THanks LC !
I needed that as well....hard to believe there was no internet even when I was in college....in the 40's!!!
gr
hard to believe there were no computers even when I was in college-(at least, personal computers). I'm sure there may be one or two other forum members who can say the same.
C'mon guys, I know you're out there.
I've had to ask too so don't feel bad.
I've never looked for one, but there has to be a Forum How-To somewhere, either burried on here (AF1 not necessarily the Falco Forum) or somewhere else on the web.
'03 Falco Bought New on 4/6/07:
Custom paint, Powder Coated RSV Swing arm, RSV Shock, Anodized Rear Sets, Ti Hardware, Anodized (Blue) Fork Caps, SL Carbon Cans, SL Carbon Chip, Custom Airbox w/ K&N Filter, Evo Clutch Slave Cyl., CF Front Sprocket Cover, Rear Hugger, & Chain Guard, GP Shifter, Tuono Rear Brake Master Cly., Evo Clutch Slave Cly., Evo Fender Eliminator, RSVR Mirrors (custom mounts), Custom Blue Dash, HID Headlight, Smoked Tail Light Lens, Integrated Turn Signals into Taillight, LEDs in Headlight & Taillight, LEDs Thru-out, SuperSprox +2 Rear Sprocket, Ariete Grips... (i'm sure there is more)
Bill
I`m in that I`m afraid !
40`s ?!!
Who said you get slower as you get older!
Well that didnt work
Who said you get slower as you get older!
what didnt work?
Are you using photobucket to host your images?
As mentioned you can use the "Insert Image" button then paste the 'direct link' into the pop up box, or even easier is to copy the IMG code straight into your forum post without having to use the insert image function.
Are we going to be spoilt with more images of your falco????
2003 Aprilia Falco
2002 Lexus IS300
Wouldn't mind a R34 GTR for my next toy!
You can alway look at the code someone else is using by just quoting them.Well that didnt work
Anyway, copy and paste this:
Will turn out like this:PHP Code:[img]http://marfmom.files.wordpress.com/2008/09/pineapple.jpg[/img]
the [img][/img] tags do the trick
Its up to you host the image "somewhere"...
Hey Ross .......Well that didnt work
Hey Ross .......
'03 Falco Bought New on 4/6/07:
Custom paint, Powder Coated RSV Swing arm, RSV Shock, Anodized Rear Sets, Ti Hardware, Anodized (Blue) Fork Caps, SL Carbon Cans, SL Carbon Chip, Custom Airbox w/ K&N Filter, Evo Clutch Slave Cyl., CF Front Sprocket Cover, Rear Hugger, & Chain Guard, GP Shifter, Tuono Rear Brake Master Cly., Evo Clutch Slave Cly., Evo Fender Eliminator, RSVR Mirrors (custom mounts), Custom Blue Dash, HID Headlight, Smoked Tail Light Lens, Integrated Turn Signals into Taillight, LEDs in Headlight & Taillight, LEDs Thru-out, SuperSprox +2 Rear Sprocket, Ariete Grips... (i'm sure there is more)
Bill
How cool, I've been trying to do this for ages without any joy.
Love that smiley
I can't really be bothered to do all that crap!
So expect my boring posting habits to continue...
Posting Permissions
Reply With Quote
