Tuning How to get 70 BHP

[will2208]

Hi Colin,
New to forum but very interested in your thread.
I'm just building a race bike using 34mm miks and no airbox, so I am going to use your jetting to start testing. Where can I get needles and needle jets to fit, please?
Many thanks,
will2208.

[Philrgv]

the colin mod works with KIT set up ,so you have to find

some Kit pipes, Kit Sapc,heads and you will find the necessary hints for carburation

in the Hop-Up Kit manual directly from Suzuki (same engine as Aprilia)

[rgvsean]

Hi Colin,
Where can I get needles and needle jets to fit, please?

thetuningworks.com carries a range of jets and carb parts, but if the size you want isn't listed just email me via the shop and I'll order in for you and add to the range; I am trying to grow it to suit what people ask for most.

[RyanFabian]

Hello
I am about to rebuild my top end and would like to do the modification to my motor.
I have standard Pipes (Gutted), standard igintion and carbs. Am looking to purchase some lomas pipes.
I want to fit the 1.4mm base gasket, Remove the head gasket and machine for the o-rings.
The bike is on the road and i run super unleaded pump gas.
Must i machine the 0.75mm off the head? or is this only for Av-Gas?
Regards
Ryan

[rgvsean]

What do you plan to use the bike for?

[MBalunovic]

can I supstitute avgas whit full racing 100RON fuel ? as avgas isn't available here

[Micah / AF1 Racing]

Should be no problem. AvGas is getting harder and harder to find which is why diesel aero engines that run on diesel of JetA are growing massively in popularity.

[RyanFabian]

Hello
I plan to use the bike on the road, a track day here and there.
it is not a daily commuter and gets ridden for breakfast runs on the twistys.
Regards
Ryan