Right boys
I have recently bought an arrow end can from one of you on the fourm.
All is well, but having got round to fitting it i discovered that stock bracket is too big and i havent got a gasket (flange gasket or somit to that effect) for it.....
Can anyone help???
Eaither if one of you have one and can send it or if one of you can point me in the right direction i will be greatful.
Thanks again boys
gasket = cerial box!! does the job for the time being! lol
no idea about bracket
The Hammer - Officialy The Tool Of The Pikey!
jolly moto, with pollished ally end can!
standard air box back on. (runs better)
15 tooth front JT sprocket
40 tooth PBR rear sprocket (polished)
xenon HID H1 100watt 5000k bulb
xenon HID H3 130watt 6000k bulb
LED White Wedge Inverted Side Light
peugeot 307 LED flush side repeaters
bright white halo rings in headlight.
paint renovation coming up.
Originally Posted by Cheeseweasel
I have bodged things before, but erm,, cardboard??
Just make one the same except, from cardboard?
na bother.
I can nock up somit for a bracket, just hadnt got a clue where to find a gasket for it.
cheers dellenty
Great temp fix, but any ideas where i can pick up a proper one?
urmm this link may b of some use if the exhaust has the 3 bolts?
http://apriliayorkshire.co.uk/catalo...Exhaust%20unit
if not lemme no n il try n find another site mate
Owner of 06 RS125
Things done at the moment:
10mm Rim tape
Rave unit fitted
Powervalve fitted
Derestricted CDI and airbox
Airblade Black Dubble Bubble
2007 RS125 Disc fitted
Forks dropped 8mm
Renthal ally front and rear sprockets
Tsubaki x ring gold chain
Full jolly moto sp exhaust
Pipercross panel filter
Wavey Rear disc with sbs brake pads
Goodridge braided hoses
34mm polished carb
aprilia yorkshire suck!
Just use cereal box for a gasket, its more or less the same thing anyway!
Alternatively, use some exhaust paste
no they dunt ive ordered loadsa parts from there took 3 workin days
Owner of 06 RS125
Things done at the moment:
10mm Rim tape
Rave unit fitted
Powervalve fitted
Derestricted CDI and airbox
Airblade Black Dubble Bubble
2007 RS125 Disc fitted
Forks dropped 8mm
Renthal ally front and rear sprockets
Tsubaki x ring gold chain
Full jolly moto sp exhaust
Pipercross panel filter
Wavey Rear disc with sbs brake pads
Goodridge braided hoses
34mm polished carb
so you want to pay 7/8 quid postage on a gasket? lol
Cheers boys
made a hanger out of 3 jubilee clips and a cable tie, gasket made out of 6 peices of frosted shreddes box.
hangers a good n but da gasket is pish, there is as much comming out da side rather than the can lol.
So ill be lookin for a bit of stainless steel at work and unless someone can point me in a better direction a gasket from aprillia yorkshire.
£2 part, £6 delivery but its the most convenient.
Any other website??
wel i neva paid the postage etc, cos i got it from my local bike shop but they shop thru aprilia yorkshire, well they specialise in italian bikes, people know it calld forza italia very good shop quite cheap aswell
Owner of 06 RS125
Things done at the moment:
10mm Rim tape
Rave unit fitted
Powervalve fitted
Derestricted CDI and airbox
Airblade Black Dubble Bubble
2007 RS125 Disc fitted
Forks dropped 8mm
Renthal ally front and rear sprockets
Tsubaki x ring gold chain
Full jolly moto sp exhaust
Pipercross panel filter
Wavey Rear disc with sbs brake pads
Goodridge braided hoses
34mm polished carb
get some gun gum mate and put it between the can and the pipe should seal nicely seeming as u love bodges
Posting Permissions
Reply With Quote
