Results 1 to 3 of 3

Thread: Problem with ECU?

  1. #1
    apriliaforum newb 100%RSV's Avatar
    Join Date
    May 2007
    Location
    UK
    Posts
    8

    Problem with ECU?

    My delaer today tried to load map II onto the ECU. After 71% of the upload was complete it froze out. They unplugged everything and started again without success....
    The bike now shoes an ERR code on the dash, the sidestand light stays on and the neutral light is off when the bike is in neutral and the fuel pump doesnt prime. They tried in vain to resolve the problem with little help from Aprilia UK. Basically my bike is still in the shop and they have no idea whats wrong and how to fix it. I am doing a track day at Donnington Park on Friday and need this sorted.
    Any ideas or suggetsions would be very much appreciated.

  2. #2
    Honest always, feared often Micah / AF1 Racing's Avatar
    Join Date
    Jun 2003
    Location
    Canyon Lake, TX USA.
    Posts
    14,496
    Charge the Axone and the bikes battery overnight...make sure battery to Axone connection is good and ground from battery to bike is good. Re-try. It will work now...99% of the time when I get similar errors they are related to either the bike or the Axone's battery.

    Also make sure the have the occrect lead attached to the Axone and then make sure the lead is 100% attached to the Axone
    Diminished expectations is the key to happiness in life.

    Micah Shoemaker
    AF1 Racing
    699 W. San Antonio
    New Braunfels, TX 78130
    830-626-3966
    micah@af1racing.com

  3. #3
    apriliaforum newb 100%RSV's Avatar
    Join Date
    May 2007
    Location
    UK
    Posts
    8
    Thanks Micah i will let them know. Hopefully will work

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •