Results 1 to 7 of 7

Thread: nitrus

  1. #1
    apriliaforum Junkie biketoczzr's Avatar
    Join Date
    Sep 2005
    Location
    east coast USA
    Posts
    356

    nitrus

    I started a new thread for this
    I hadent thought of using the air injector to run in the nitrus directly I was thinking of using a fogger type system . I just got started with this and ended up in the hospital with an infected finger (from a tiny cut) it cost me all most 5000 dollars .I am still paying it off so I cant get another scooter till then and I wont blow up my 2006. I ride it to work every day.

  2. #2
    apriliaforum expert THE MAX's Avatar
    Join Date
    Sep 2005
    Location
    Netherlands
    Posts
    3,040
    Oke............here we go (just some 'Max thoughts' )

    -You want 'wet system' or 'dry system'

    -Putting nos in you need differdend ignition timing ........How you will arange that ?

    -At the momment you use the NOS you need extra feul . Where do you get the extra feul ? Also with a frogger?

    -What efect will that give when air/feul/oil mixture is been compressed by compressor ?




    What 'fun' it will bee ,still doing 9k @115 km/pu (because thats where the software 'stops')


    Believe me...........we all have to wait for the 'techrat enounchement'

    DI-tech > N.N.N (No Nos Needed)
    Attached Images Attached Images      
    Last edited by THE MAX; 03-03-2007 at 08:33 AM.

  3. #3
    apriliaforum Junkie biketoczzr's Avatar
    Join Date
    Sep 2005
    Location
    east coast USA
    Posts
    356

    fun fun fun

    I was planning a wet system seperate fuel pump two selinoids premix the gas
    I do not know what to do about the ignition timing you are ahead of me on the scooter. on a car or motorcycle the powercamander will retard enough
    I fully expect the motor to blow on the second run so I need to make a down wind pass first . what moter is that on the dyno is it 50 cc 40 hp is great I figure 20 will go to 85 mph because a ninja 250 has 20 hp+/- and goes 85 mph

  4. #4
    apriliaforum expert THE MAX's Avatar
    Join Date
    Sep 2005
    Location
    Netherlands
    Posts
    3,040
    Quote Originally Posted by biketoczzr
    I was planning a wet system seperate fuel pump two selinoids premix the gas
    I do not know what to do about the ignition timing you are ahead of me on the scooter. on a car or motorcycle the powercamander will retard enough
    I fully expect the motor to blow on the second run so I need to make a down wind pass first . what moter is that on the dyno is it 50 cc 40 hp is great I figure 20 will go to 85 mph because a ninja 250 has 20 hp+/- and goes 85 mph
    This is 70 scoot

    -The guy called 'MOL' and he is our best in NOS @ Scoot

    Dont forget this takes 2-3 years testing to get there. I know he did 400 mtr runs with this engine on santa-pod

    Becaus its for sprint ,they are not intrested in top-speed.........But if you look at one of his dyno ,it is more the 150 km/pu before they release the trothel
    Attached Images Attached Images  
    Last edited by THE MAX; 03-03-2007 at 09:56 AM.

  5. #5
    apriliaforum expert THE MAX's Avatar
    Join Date
    Sep 2005
    Location
    Netherlands
    Posts
    3,040
    Quote Originally Posted by biketoczzr
    I was planning a wet system seperate fuel pump two selinoids premix the gas
    I do not know what to do about the ignition timing you are ahead of me on the scooter. on a car or motorcycle the powercamander will retard enough
    I fully expect the motor to blow on the second run so I need to make a down wind pass first . what moter is that on the dyno is it 50 cc 40 hp is great I figure 20 will go to 85 mph because a ninja 250 has 20 hp+/- and goes 85 mph
    If you want nice results in this kind of race.....buy a carb scoot .......

    What are 'the rule's in this competition ? most be 50 cc ? 70 CC ? 80 cc ? type of feuls ?

    Are you alowed to mod the frame ? ect ........
    Last edited by THE MAX; 03-03-2007 at 10:00 AM.

  6. #6
    apriliaforum Junkie biketoczzr's Avatar
    Join Date
    Sep 2005
    Location
    east coast USA
    Posts
    356

    rules

    Quote Originally Posted by THE MAX
    If you want nice results in this kind of race.....buy a carb scoot .......

    What are 'the rule's in this competition ? most be 50 cc ? 70 CC ? 80 cc ? type of feuls ?

    Are you alowed to mod the frame ? ect ........
    I definitly want a carb model 50 cc in the class I am not sure I think they allow a twenty percent over bore but I am not clear on that
    for production runs the track supplies fuel If I mod the frame or any outside bodywork I go into modifiedclass if I run nitrous I am in modified the rules are on the east coast timing assocation webcite I am still waiting for my membership paperwork that will have the rule book. I will definitly read that before I spend any money . I need my membership pack by the end of the month because I need to get my licence . first is 125mph then on up
    my friends bike is capable of close to 200mph and I will need to get licence all the way up so for now I am just concentrating on the licence transportation and accomidations for march/april

  7. #7
    apriliaforum Member Timmy1's Avatar
    Join Date
    Feb 2007
    Location
    Dearborn Heights Mi
    Posts
    184
    hey biketocazzr i am sorry your finger got cut on the nitrous but on nitrous i wouldnt do it beacuse of the fact is you will blow your engine on the second try but after that you could go 85mph but i guess you need to work on the engine to get it to 85mph but good luck

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •