ApriliaForum sponsored by AF1 Racing, inc. http://www.apriliaforum.com/forums/ AF1 Racing, inc. specializes in performance tuning and aftermarket products for Aprilia, Ducati, Honda, Kawasaki, MV Agusta, Suzuki, and Yamaha. Our retail location features the latest Factory Pro EC997a eddy-current dynamometer with 4-gas EGA. AF1 Racing operates a online shopping mall that has everything from Aprilia OEM parts, tires, chains, chemicals, performance parts, and racing parts like exhausts, braking systems, and Motovation framesliders for all brands of bikes. Browse the catalog by clicking here en Thu, 17 May 2012 01:01:01 GMT vBulletin 60 http://www.apriliaforum.com/forums/images/misc/rss.png ApriliaForum sponsored by AF1 Racing, inc. http://www.apriliaforum.com/forums/ RS250 Production Numbers? http://www.apriliaforum.com/forums/showthread.php?250804-RS250-Production-Numbers&goto=newpost Thu, 17 May 2012 01:00:27 GMT Hi all. I have a 1996 RS250 "Reggiani" (red,silver,blue) and was just curious if anyone knew how many of these were made? I've seen a lot of the Chesterfields but not many like mine. I've tried to find info online but so far havent found anything. I would appreciate any info. Thanks in advance. ]]> RS250 81-Delorean http://www.apriliaforum.com/forums/showthread.php?250804-RS250-Production-Numbers Rear wheel spins while lifted....seems odd http://www.apriliaforum.com/forums/showthread.php?250803-Rear-wheel-spins-while-lifted-seems-odd&goto=newpost Thu, 17 May 2012 00:41:17 GMT I had my bike lifted on a rearstand. When the bike is in gear with the cluch lever squeezed it seems to still move the rear wheel quite a bit. Even after the oil should be plenty warm it continues to spin the rear wheel. I am aware of cold oil creating enough friction to turn the gears which would... I had my bike lifted on a rearstand. When the bike is in gear with the cluch lever squeezed it seems to still move the rear wheel quite a bit. Even after the oil should be plenty warm it continues to spin the rear wheel. I am aware of cold oil creating enough friction to turn the gears which would spin the motor, But Shouldn't it stop spinning with the clutch lever squeezed...Sounds like maybe my clutch adjustment is off, This isn't normal right? It doesn't feel like the clutch is adjusted incorrectly when I am come to a stop. ]]> 2010-2012 RSV4 Factory and RSV4-R igotyofire http://www.apriliaforum.com/forums/showthread.php?250803-Rear-wheel-spins-while-lifted-seems-odd RSV4 R Showa Forks FS http://www.apriliaforum.com/forums/showthread.php?250802-RSV4-R-Showa-Forks-FS&goto=newpost Thu, 17 May 2012 00:21:19 GMT Swapped my forks. These Showa's have 6k miles. Pics on request. Trust me they're fine. $200 ]]> Aprilia Parts and Accessories for Sale JPP http://www.apriliaforum.com/forums/showthread.php?250802-RSV4-R-Showa-Forks-FS <![CDATA[Powder coated OZ's showoff thread!!!!!!!!]]> http://www.apriliaforum.com/forums/showthread.php?250801-Powder-coated-OZ-s-showoff-thread!!!!!!!!&goto=newpost Thu, 17 May 2012 00:12:43 GMT Just got these done. Very pleased with the result. Attachment 191762 (http://www.apriliaforum.com/forums/attachment.php?attachmentid=191762)Attachment 191761 (http://www.apriliaforum.com/forums/attachment.php?attachmentid=191761) Just got these done. Very pleased with the result.

Click image for larger version.  Name: IMAG0326.jpg  Views: 0  Size: 124.5 KB  ID: 191762Click image for larger version.  Name: IMAG0328.jpg  Views: 0  Size: 125.4 KB  ID: 191761
Attached Thumbnails
Click image for larger version.  Name: IMAG0326.jpg  Views: N/A  Size: 124.5 KB  ID: 191762  

Click image for larger version.  Name: IMAG0328.jpg  Views: N/A  Size: 125.4 KB  ID: 191761  

]]> RSV Tuono, Tuono R, Tuono Racing, and Tuono Factory (2002-2005) BrummyMax http://www.apriliaforum.com/forums/showthread.php?250801-Powder-coated-OZ-s-showoff-thread!!!!!!!! Efi http://www.apriliaforum.com/forums/showthread.php?250800-Efi&goto=newpost Thu, 17 May 2012 00:04:50 GMT My 2009 SR50 Factory just stopped running the dash is saying EFI disconnected with a picture of a plug disconnected. Anyone can help me out with what this is. Thanks My 2009 SR50 Factory just stopped running the dash is saying EFI disconnected with a picture of a plug disconnected. Anyone can help me out with what this is. Thanks ]]> Scarabeo 50 Ditech, SR 50 Ditech, SR Factory tguarino http://www.apriliaforum.com/forums/showthread.php?250800-Efi Mirror block off plates? http://www.apriliaforum.com/forums/showthread.php?250799-Mirror-block-off-plates&goto=newpost Wed, 16 May 2012 23:53:27 GMT Anyone know of any block off plates for the RSV1000R? I cant seem to find any on AF1 racing...anyone got any good suggestions? Anyone know of any block off plates for the RSV1000R? I cant seem to find any on AF1 racing...anyone got any good suggestions? ]]> RSVR and RSVR Factory (2004-2009) AdrenalineJunkie http://www.apriliaforum.com/forums/showthread.php?250799-Mirror-block-off-plates Missing? http://www.apriliaforum.com/forums/showthread.php?250798-Missing&goto=newpost Wed, 16 May 2012 23:45:07 GMT No, not the bike - it's (they're) where I left it/them.
But has anyone heared from any of our South African inmates lately?
There were quite a few guys with Capos over there and I know at least one was selling up to head here to Australia - but we haven't heard a peep from them recently.
As their summer riding and rally season is coming to an end, I thought we might hear from some guys adding farkles or doing some maintenance, as those guys ride fast, far and hard.
Or has there been too much of this::micah:? ]]> ETV1000 CapoNord (all years) Precis http://www.apriliaforum.com/forums/showthread.php?250798-Missing Vacuum Line Routing http://www.apriliaforum.com/forums/showthread.php?250797-Vacuum-Line-Routing&goto=newpost Wed, 16 May 2012 23:17:46 GMT In...]]> Hey all,

My Fut came to me with the vacuum lines a bit knackered (AND a CA carbon canister system - not a good combination!). I'm trying to put it all back to 49-state stock, but I'm having trouble figuring out where everything goes based on the parts fiches. I've got 5 quick questions -->

In the engine diagram below, I have three questions.
1) The lines in the brown circles go to the throttle body vacuum feeds for each cylinder, correct?
2) The green line goes to the the vacuum assisted clutch, I believe...correct?
3) Where the devil does the black line go?

Name: Engine.jpg Views: 7 Size: 126.2 KB

4) In the air box diagram, where the devil do the pink lines go?

Name: Airbox.jpg Views: 7 Size: 99.8 KB


5) Finally, regarding the check valves (shown as numbers 27 in the engine diagram), which way are they facing? Based on my logic, I should be able to BLOW through them TOWARDS the throttle bodies (so that the vacuum from the TB's can suck through the check valves to operate the vacuum assisted clutch).


Thanks for your help guys - I'm pulling my hair out over this one. :mad:
Attached Images
  
]]> RST1000 Futura (all years) maro6613 http://www.apriliaforum.com/forums/showthread.php?250797-Vacuum-Line-Routing <![CDATA[can't make my mind between witch one i should buy]]> http://www.apriliaforum.com/forums/showthread.php?250796-can-t-make-my-mind-between-witch-one-i-should-buy&goto=newpost Wed, 16 May 2012 22:56:27 GMT I want to buy a new engine because mine is losing prformance at an alarming rate (im fully deristricted with 3 degree advance key and every thing and i can't get passed 74 km/h) so i would like to buy a bbk and im wondering if i should get the polini or malossi one

malossi : cast iron
comes with an ecu
341.43 euros
polini : cast iron
comes with no ecu
254.36 euros
I want an engine that will be pretty reliable but i dont feel like paying 341 euros so I am more going towards the polini but before i do so i would like to know which one you guys prefer ]]> Scarabeo 50 Ditech, SR 50 Ditech, SR Factory apri11ia http://www.apriliaforum.com/forums/showthread.php?250796-can-t-make-my-mind-between-witch-one-i-should-buy magura vs fte http://www.apriliaforum.com/forums/showthread.php?250793-magura-vs-fte&goto=newpost Wed, 16 May 2012 22:13:38 GMT hello im looking forward to change my front brake fte system,and i found a very good deal to buy a magura mastercylinder + caliper.how wide is the fte mastercylinder? 16mm? i know thata magura is 16mm. ive also read that pads last longer too. the thing is that only for racing the fte caliper i feel... hello im looking forward to change my front brake fte system,and i found a very good deal to buy a magura mastercylinder + caliper.how wide is the fte mastercylinder? 16mm? i know thata magura is 16mm. ive also read that pads last longer too. the thing is that only for racing the fte caliper i feel like the brake lever comes really close to my fingers,in spain we call this "fadding", i supose in english yo use the same name for this. i hope you understan what im trying to explain jaja.thank you!! ]]> 2006-2009 Aprilia RXV, SXV, MXV 4.5/5.5 V-Twins abaspal http://www.apriliaforum.com/forums/showthread.php?250793-magura-vs-fte Where can I get service on my 2000RSV? http://www.apriliaforum.com/forums/showthread.php?250792-Where-can-I-get-service-on-my-2000RSV&goto=newpost Wed, 16 May 2012 22:07:45 GMT I live in Coral Springs, Florida. Near to Ft. Lauderdale. Anyone know where I can get my bike serviced in this area? I live in Coral Springs, Florida. Near to Ft. Lauderdale. Anyone know where I can get my bike serviced in this area? ]]> RSV1000 Mille, Mille R, and Mille SP (1998-2003) HarryDash http://www.apriliaforum.com/forums/showthread.php?250792-Where-can-I-get-service-on-my-2000RSV <![CDATA[Need some Help! > START BUTTON SILENCE]]> http://www.apriliaforum.com/forums/showthread.php?250791-Need-some-Help!-gt-START-BUTTON-SILENCE&goto=newpost Wed, 16 May 2012 21:57:48 GMT Hi guys!

I was hoping you could help me with some of your expert knowledge.

I fit a new FH008 Rectifier/Regulator a few days ago that I got from Stanlybobby with a with new wiring loom, and afterwards the bike seemed to be working fine. It started no problems. I didn't have my voltmeter available until today so went down to the garage to check out my new voltage reading and go for a ride, but much to my surprise an annoyance the bike didn't start! :crybaby:

When I turn the ignition on I can hear a noise from under the tank as normal. The oil light stays on as normal. The EFI light is off. The lights, indicators, horn etc all work fine, but when I press the start button there is only silence. Not even a click from the solenoid. All the fuses seem to be okay. I connected the diagnostic wires under the seat together and only got "1", so no coil error codes. I charged the battery and am getting good voltage from it, and also from the new Rectifier/Regulator but still it won't start. Is it possible I short circuited something and caused some damage?

Do you guys have any ideas what the problem might be and any suggestions of what to do next?

 ]]> ETV1000 CapoNord (all years) Makky_T http://www.apriliaforum.com/forums/showthread.php?250791-Need-some-Help!-gt-START-BUTTON-SILENCE Thinking about getting a 5.5 have ? http://www.apriliaforum.com/forums/showthread.php?250790-Thinking-about-getting-a-5-5-have&goto=newpost Wed, 16 May 2012 21:02:43 GMT So i haven't been on a bike in a couple years . I use to own a 696 monster but have never ridden a dirt bike before (which is crazy to me). I keep hearing these are not for rookies. Can someone brake down why for me ? I will be using around town and in lots of dirt. Just trying to figure out if i should go with a aprilia or get a KTM like a couple of my buddys. Any input is much obliged Thanks Tons of info here ... ]]> 2006-2009 Aprilia RXV, SXV, MXV 4.5/5.5 V-Twins Dub http://www.apriliaforum.com/forums/showthread.php?250790-Thinking-about-getting-a-5-5-have bike running rich and lumpy http://www.apriliaforum.com/forums/showthread.php?250789-bike-running-rich-and-lumpy&goto=newpost Wed, 16 May 2012 20:49:38 GMT Please help,the bike was running rich , black smoke and lumpy running on one then two cyclinders I have fitted staintunes new coils from the forum, 2 x new starter solenoids, took the bike last week to premier bikes in askern (uk) had it re-mapped as per forum advice paid £108 got on bike now still... Please help,the bike was running rich , black smoke and lumpy running on one then two cyclinders I have fitted staintunes new coils from the forum, 2 x new starter solenoids, took the bike last week to premier bikes in askern (uk) had it re-mapped as per forum advice paid £108 got on bike now still misfiring from cold ran bike to A1 approx 10 mile, turned bike round and returned back to premier bikes bike dangerously unrideable, steve said he will have another look finds it odd? and was not happy. very helpfull but anyone any ideas? plaese help lads!:confused::confused::bangwall: ]]> ETV1000 CapoNord (all years) bikeit http://www.apriliaforum.com/forums/showthread.php?250789-bike-running-rich-and-lumpy Rs 250 harada for sale http://www.apriliaforum.com/forums/showthread.php?250788-Rs-250-harada-for-sale&goto=newpost Wed, 16 May 2012 20:34:26 GMT Image: http://www.apriliaforum.com/forums/images/misc/unknown.gif (http://www.apriliaforum.com/forums/member.php?67609-Ross71) Ross71 (http://www.apriliaforum.com/forums/member.php?67609-Ross71) - Today 02:17 PMEdit...
Ross71 - Today 02:17 PMEdit Report
Hi all
im selling my Vreg aprilia rs 250 harada replica
bike is all original, but 2 years ago when I last moved home
the rear left hand side decal has been scratched.
Bike has less then 9000 km always garaged & ridden on dry whether
if you are interested call on my mobile 07951425459
£3350
thanks
ross
]]> Aprilia Motorcycles and Scooters for Sale Ross71 http://www.apriliaforum.com/forums/showthread.php?250788-Rs-250-harada-for-sale