Starting Issue...

[Falco_1000]

The past few weeks I'has some problem ... starting the V2 monster, leading me to the conclusion that the switch produces some sort of sort circuit, causing the dash to reset and loose all setings (time, red light indicator...)
Has anyone had similar problem?
The bike is still under guarantee, the only problem is that this thing happens occasionally...

:WTF:

[danowat]

No, its the battery discharging enough to reset the dash, a common problem it seems.

I had it once, but I havent had it since I make sure I dont start mine with the headlights switch on.

Dan,

[caseymx5]

read the sticky at the top of the falco forum, it has all the info you need.

[CarlosT]

I wouldn't do that while the bike is under warranty. I'd ask the dealer to replace the battery.

[Yellowduck]

Falco 1000,

As the bikes still under warranty, it may be worth you using this as an excuse for a brand new battery.

[Falco_1000]

I don't know how things work with your dealers, but here battery can only be replaced if a problem occurs within few months after purchase. In any case I will try to work it out with my dealer.

Regarding the wire mode, I made a schematic of what I understad from what I read, needs to be done...Correct me If I am rwong somewhere, but I think this is the hole story... right?

http://img155.imageshack.us/img155/6294/wiremodefv1.jpg (http://imageshack.us)

[Falco_1000]

All that we do is to add a 14ga wire and route it through to reach the batery from the white plug.