View Full Version : Question: Hand guard mounting....
08-27-2006, 08:20 PM
I have questions about installing a set of Pro-Rally hand guards w/ the fat-bar mount kit.
First off, the stock bar is thick-walled----which prevents the mount from going into the end.
Second, the brake-side seems to narrow to fit (and clear) the lever....
Any help would be appreciated.
08-27-2006, 10:02 PM
I ran into the same problem. I used a 9/16th drill and bored out the end of the bar to accomdate the insert. You will need to move your break assy in about 1/8 of an inch toward the center clamp. After that, you should not have any problem.
I looked at every mounting option at my disposal--including going to a different bar. At this time there is no other option. You must drill the bar or go to a different bar. The bars on the Aprilia are beefy. After mounting I have no issues with vibration etc.
Kind of a hassle but it works.
08-27-2006, 10:03 PM
I would post photos but nothing so far will let me do so.:confused:
Powered by vBulletin® Version 4.2.3 Copyright © 2016 vBulletin Solutions, Inc. All rights reserved.