PDA

View Full Version : Back firing....



Dcups
08-19-2006, 01:15 PM
Is everyones backfiring alot? or is it just me?

What maps are everyone running?

And if any addtional tweask did you guys make to it?

tia

teej710
08-19-2006, 01:41 PM
nope, runs fine. can't help with map, done by dealer

Dcups
09-03-2006, 10:28 PM
NO MO BACKFIRING!!!!!!


Dropped it off the dealer and the re-synched the TB and reset the aTPS and Cold Start.

Bike is running 100% better now... And Im back on the standard map.

Cold starts still takes about 5-6 tries before it wants to start running. WHne the cold start is turned on it idles about 3400-3600.

Normal Idle is 1700-1800.

Bike is feeling alot more responsive as well also gone is the on off throttle below 4000 rpm....

Thats all the updates I got right now!!! Other than this bike still ROCKS!!!!

Jony2Stones
09-04-2006, 09:54 AM
Anyone know how to adjust the cold-start/high-idle switch....mine barely keeps the bike at 2000-2100rpms???

Most times I have to hold it open to at atleast 2500-2700 rpms to keep her going...it'd be nice to have the cold start set there...

the_meek
09-04-2006, 03:34 PM
The cold start switch doesn't do anything more than hold the throttle on a little bit, just like you do manually if it doesn't work.
If your hot idle is good then adjust a little of the slack out the throttle cable until the cold start lifts the idle enough. Be careful to make sure there is some play in the cable when the cold start is off.
cheers