PDA

View Full Version : -02 Engine on a -00 Mille??


_basse_
06-17-2006, 02:40 AM
I´ve been unlucky to have my crankshaft broken on my Mille -00.

Now, I have found a -02 engine to a fair price. My question is: Does the -02 engine fit without any modifications on my -00 Mille?

Excuse my english, I´m from Sweeeeden:burnout:
jenspebu
06-17-2006, 02:55 AM
Hi to sweden:)

The answer is YES




btw: Wellcome to the board!
Trancey
06-17-2006, 09:07 AM
I'm sure there will be people on here who are much more knowledgable on the subject than myself, but, I think you may also have to fit an 02 ECU.
Ed / AF1 Racing
06-17-2006, 09:37 AM
all you need is 2002 EPROM, the ECU and all other electronics is the same
_basse_
06-17-2006, 10:50 AM
all you need is 2002 EPROM, the ECU and all other electronics is the same

Stupid as I am..... What is EPROM?? Is it software?
Captain Capo
06-17-2006, 12:53 PM
Its a chip with software and mapping tables for the ECU - the chip marked RP58 here:
http://www.dmw.info/stuff/DSCF0690.JPG

If you find you need the 2001-02 chip let me know.... you can have this one for a modest sum (just the chip marked RP58)


Dave
Aprilia_RSV_Dan
06-17-2006, 02:02 PM
Yes it will bolt right in, you can even get by without changing the chip, but the fuel mapping probably would be much closer to being correct with the 01-02 euro chips(02-03 US).

If the motor purchase falls thru I'm sue you could find someone with a good crank also, I actually have a couple but shipping to Sweeden from the West coast in the US would be to much.
T Davidsson
06-17-2006, 07:18 PM
Buster(on sporthoj.com)

Can make new chip for you..he is cheap :)
_basse_
06-18-2006, 03:21 PM
Thanks!!

Now I have enough knowledge to buy me a new engine:)
jetfever
06-18-2006, 11:19 PM
Hey, I have an ECU I got used, it does not have the diode between the 2 pins at the top left of the photo ECU.(right next to the screw) The glue (or whatever it is) does not looked disturbed...I wonder what it does?
Captain Capo
06-19-2006, 03:46 PM
Hey, I have an ECU I got used, it does not have the diode between the 2 pins at the top left of the photo ECU.(right next to the screw) The glue (or whatever it is) does not looked disturbed...I wonder what it does?


There's a funny thing my other ECU doesn't have one - looks like a resistor to me - soldered and glued.... and the ECU doesn't work properly.....