PDA

View Full Version : Stock windscreen removal



pseudocode
03-07-2003, 09:59 AM
Anyone have any advise on how to remove the stock windscreen off the stock bodywork on a cup bike? Those damn rivet things don't seem to come out easily and I don't want to damage the windscreen or the bodywork. Suggestions anyone?

monson708
03-08-2003, 08:26 AM
you have to get under them w/ a sharp 90 degree pick.once they are bent enough you can cut the little washer w/ a small side cutter.its a pain for sure but i would rather do it @ home than try to fu:eek: k around @ the track with limited tools.i then get nut serts and screws w/ plastic washers from a hardware store.caution!!! use a step drill of unibit to drill wind screens.they like to break w/ drill bits.