sr125

[lee sr125]

Just wondering on any cheap mods to make the scooter faster than stock ? Its all fully origonal apart from the 10.5 gram rollers

Thanks!

[lee sr125]

Everything is fully stock apart from 10,5 gram rollers n bike hits 70mph clock speed (65mph car speed check) any ideas how to make it faster? Are the rollers too light?

[lee sr125]

Moped is fully standerd

Any ideas how to increase speed without spendin out on bore kits , crank etc

Thanks

[feelergaugephil]

1st off, remove turban!
Ok, now we got that cleared up, your restrictions are most likely in the exhaust and carb.
Remove your exhaust and look up into the barrel (cylinder) and see if theres a brass ring on the inside (not the gasket, on the inside of exhaust hole) if there is, pop that out.
Try get a after market exhaust, and with the stupid BS stamped on it too!
Your carb may have restrictions in it that can't be removed, so look for a simular carb but not a massive one as it will flood it out......
Also, check air box, may be restriction in there too.
Hope this helps.
Phil (formerly of Manchester)

[feelergaugephil]

Your welcome......

[shorty08]

172 kit? depends how much you wanna spend..