Torque Specs

[Ted / AF1 Racing]

Click here (http://www.apriliaforum.com/techtips/1000/torque%20specs.xls) to download this document in an Excel spreadsheet format.

<table border="1" height="6295" width="757"><tbody><tr style="height:20.25pt" height="27"><td colspan="6" class="xl36" bgcolor="#808080" height="31" valign="top" width="759">
Engine
</td> </tr> <tr style="height:15.75pt" height="21"> <td colspan="6" class="xl37" bgcolor="#C0C0C0" height="24" valign="top" width="759">
Fastening of engine to frame
</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl31" height="21" valign="top" width="367">Description</td> <td class="xl25" align="center" height="21" valign="top" width="39">Qty</td> <td class="xl25" align="center" height="21" valign="top" width="180">Screw/ Nut</td> <td class="xl25" align="center" height="21" valign="top" width="58">
Nm
</td> <td class="xl28" align="center" height="21" valign="top" width="71">ft-lb</td> <td class="xl25" align="center" height="21" width="14">Note</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Front connection</td> <td class="xl26" align="center" height="20" valign="top" width="39">2+2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M10</td> <td class="xl26" align="center" height="20" valign="top" width="58">40</td> <td class="xl29" align="center" height="20" valign="top" width="71">29.5</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Left-side upper and lower rear connection</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M10</td> <td class="xl26" align="center" height="20" valign="top" width="58">50</td> <td class="xl29" align="center" height="20" valign="top" width="71">36.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Adjusting bush right-side upper and lower rear connection</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M20x1.5</td> <td class="xl26" align="center" height="20" valign="top" width="58">12</td> <td class="xl29" align="center" height="20" valign="top" width="71">8.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="mso-height-source:userset;height:11.25pt" height="15"> <td class="xl32" height="20" valign="top" width="367">Lock ring right-side upper and lower rear connection</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M20x1.5</td> <td class="xl26" align="center" height="20" valign="top" width="58">50</td> <td class="xl29" align="center" height="20" valign="top" width="71">36.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Screw right-side upper and lower rear connection</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M10</td> <td class="xl26" align="center" height="20" valign="top" width="58">50</td> <td class="xl29" align="center" height="20" valign="top" width="71">36.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:15.75pt" height="21"> <td colspan="6" class="xl37" align="center" bgcolor="#C0C0C0" height="24" valign="top" width="759">
Elements fastened to the engine
</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl31" height="21" valign="top" width="367">Description</td> <td class="xl25" align="center" height="21" valign="top" width="39">Qty</td> <td class="xl25" align="center" height="21" valign="top" width="180">Screw/ Nut</td> <td class="xl25" align="center" height="21" valign="top" width="58">Nm</td> <td class="xl28" align="center" height="21" valign="top" width="71">ft-lb</td> <td class="xl25" align="center" height="21" width="14">Note</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Engine oil inlet flange</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">12</td> <td class="xl29" align="center" height="20" valign="top" width="71">8.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Engine oil drain plug</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">12</td> <td class="xl29" align="center" height="20" valign="top" width="71">8.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Rear brake lever mount fastening</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">10</td> <td class="xl29" align="center" height="20" valign="top" width="71">7.4</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Rear brake lever mount fastening</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M8</td> <td class="xl26" align="center" height="20" valign="top" width="58">17</td> <td class="xl29" align="center" height="20" valign="top" width="71">12.5</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Rear brake pump mount fastening</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M8</td> <td class="xl26" align="center" height="20" valign="top" width="58">17</td> <td class="xl29" align="center" height="20" valign="top" width="71">12.5</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Pinion fastening</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M10</td> <td class="xl26" align="center" height="20" valign="top" width="58">50</td> <td class="xl29" align="center" height="20" valign="top" width="71">36.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Clutch control cylinder fastening</td> <td class="xl26" align="center" height="20" valign="top" width="39">3</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">12</td> <td class="xl29" align="center" height="20" valign="top" width="71">8.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Pinion case fastening</td> <td class="xl26" align="center" height="20" valign="top" width="39">3</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">6</td> <td class="xl29" align="center" height="20" valign="top" width="71">4.4</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of fuel delivery pipe to throttle body</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M12x1.5</td> <td class="xl26" align="center" height="20" valign="top" width="58">22</td> <td class="xl29" align="center" height="20" valign="top" width="71">16.2</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Coolant drain screw</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">10</td> <td class="xl29" align="center" height="20" valign="top" width="71">7.4</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Coolant thermistors</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M14</td> <td class="xl26" align="center" height="20" valign="top" width="58">30</td> <td class="xl29" align="center" height="20" valign="top" width="71">22.1</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:15.75pt" height="21"> <td colspan="6" class="xl37" bgcolor="#C0C0C0" height="20" valign="top" width="759">
Driving shaft, countershaft, gearshift
</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl31" height="20" valign="top" width="367">Description</td> <td class="xl25" align="center" height="20" valign="top" width="39">Qty</td> <td class="xl25" align="center" height="20" valign="top" width="180">Screw/ Nut</td> <td class="xl25" align="center" height="20" valign="top" width="58">Nm</td> <td class="xl28" align="center" height="20" valign="top" width="71">ft-lb</td> <td class="xl25" align="center" height="20" width="14">Note</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="1" valign="top" width="367">Positioning lever / positioning disc</td> <td class="xl26" align="center" height="1" valign="top" width="39">2</td> <td class="xl26" align="center" height="1" valign="top" width="180">Screw T.C.E.I. M6 x 20</td> <td class="xl26" align="center" height="1" valign="top" width="58">11</td> <td class="xl29" align="center" height="1" valign="top" width="71">8.1</td> <td class="xl26" align="center" height="1" width="14">L243</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Differential shaft under KS</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">Nut M22 x 1.5</td> <td class="xl26" align="center" height="20" valign="top" width="58">150</td> <td class="xl29" align="center" height="20" valign="top" width="71">110.5</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">KS driving shaft</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">Nut M33 x 1.5</td> <td class="xl26" align="center" height="20" valign="top" width="58">230</td> <td class="xl29" align="center" height="20" valign="top" width="71">169.5</td> <td class="xl26" align="center" height="20" width="14">L243</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="14" valign="top" width="367">Countershaft under MS</td> <td class="xl26" align="center" height="14" valign="top" width="39">1</td> <td class="xl26" align="center" height="14" valign="top" width="180">Screw T.C.E.I. M10 x 20</td> <td class="xl26" align="center" height="14" valign="top" width="58">50</td> <td class="xl29" align="center" height="14" valign="top" width="71">36.8</td> <td class="xl26" align="center" height="14" width="14">L648</td> </tr> <tr style="height:15.75pt" height="21"> <td colspan="6" class="xl37" bgcolor="#C0C0C0" height="20" valign="top" width="759">
Oil Pump
</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl31" height="20" valign="top" width="367">Description</td> <td class="xl25" align="center" height="20" valign="top" width="39">Qty</td> <td class="xl25" align="center" height="20" valign="top" width="180">Screw/ Nut</td> <td class="xl25" align="center" height="20" valign="top" width="58">Nm</td> <td class="xl28" align="center" height="20" valign="top" width="71">ft-lb</td> <td class="xl25" align="center" height="20" width="14">Note</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Oil pump</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M12 x 1.5</td> <td class="xl26" align="center" height="20" valign="top" width="58"> </td> <td class="xl29" align="center" height="20" valign="top" width="71"> </td> <td class="xl26" align="center" height="20" width="14">L648</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Oil pump casing</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180"> </td> <td class="xl26" align="center" height="20" valign="top" width="58"> </td> <td class="xl29" align="center" height="20" valign="top" width="71"> </td> <td class="xl26" align="center" height="20" width="14">L574</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="21" valign="top" width="367">Oil pump lid</td> <td class="xl26" align="center" height="21" valign="top" width="39">4</td> <td class="xl26" align="center" height="21" valign="top" width="180">Screw T.C.E.I. M6 x 45</td> <td class="xl26" align="center" height="21" valign="top" width="58">11</td> <td class="xl29" align="center" height="21" valign="top" width="71">8.1</td> <td class="xl26" align="center" height="21" width="14"> </td> </tr> <tr style="height:15.75pt" height="21"> <td colspan="6" class="xl37" align="center" bgcolor="#C0C0C0" height="21" valign="top" width="759">Clutch</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl31" height="20" valign="top" width="367">Description</td> <td class="xl25" align="center" height="20" valign="top" width="39">Qty</td> <td class="xl25" align="center" height="20" valign="top" width="180">Screw/ Nut</td> <td class="xl25" align="center" height="20" valign="top" width="58">Nm</td> <td class="xl28" align="center" height="20" valign="top" width="71">ft-lb</td> <td class="xl25" align="center" height="20" width="14">Note</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Secondary KS shaft</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">Nut M24 x 1.5</td> <td class="xl26" align="center" height="20" valign="top" width="58">170</td> <td class="xl29" align="center" height="20" valign="top" width="71">125.3</td> <td class="xl26" align="center" height="20" width="14">L648</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Clutch spring</td> <td class="xl26" align="center" height="20" valign="top" width="39">6</td> <td class="xl26" align="center" height="20" valign="top" width="180">Screw T.E. M6 x 25</td> <td class="xl26" align="center" height="20" valign="top" width="58">11</td> <td class="xl29" align="center" height="20" valign="top" width="71">8.1</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Disengagement rod</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">Locking nut M12</td> <td class="xl26" align="center" height="20" valign="top" width="58">30</td> <td class="xl29" align="center" height="20" valign="top" width="71">22.1</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="13" valign="top" width="367">Complete diaphragm ring</td> <td class="xl26" align="center" height="13" valign="top" width="39">8</td> <td class="xl26" align="center" height="13" valign="top" width="180">Screw T.C.E.I. M5 x 20</td> <td class="xl26" align="center" height="13" valign="top" width="58">5</td> <td class="xl29" align="center" height="13" valign="top" width="71">3.7</td> <td class="xl26" align="center" height="13" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Clutch gear / clutch housing</td> <td class="xl26" align="center" height="20" valign="top" width="39">3</td> <td class="xl26" align="center" height="20" valign="top" width="180">Screw T.E. M8 x 16</td> <td class="xl26" align="center" height="20" valign="top" width="58">30</td> <td class="xl29" align="center" height="20" valign="top" width="71">22.1</td> <td class="xl26" align="center" height="20" width="14">L648</td> </tr> <tr style="height:15.75pt" height="21"> <td colspan="6" class="xl37" bgcolor="#C0C0C0" height="20" valign="top" width="759">
Head, cylinders
</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl31" height="20" valign="top" width="367">Description</td> <td class="xl25" align="center" height="20" valign="top" width="39">Qty</td> <td class="xl25" align="center" height="20" valign="top" width="180">Screw/ Nut</td> <td class="xl25" align="center" height="20" valign="top" width="58">Nm</td> <td class="xl28" align="center" height="20" valign="top" width="71">ft-lb</td> <td class="xl25" align="center" height="20" width="14">Note</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="2" valign="top" width="367">Camshaft support / head "1" (front)</td> <td class="xl26" align="center" height="2" valign="top" width="39">8</td> <td class="xl26" align="center" height="2" valign="top" width="180">Screw T.C.E.I. M6 x 30</td> <td class="xl26" align="center" height="2" valign="top" width="58">11</td> <td class="xl29" align="center" height="2" valign="top" width="71">8.1</td> <td class="xl26" align="center" height="2" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="1" valign="top" width="367">Head "1" (front)</td> <td class="xl26" align="center" height="1" valign="top" width="39">2</td> <td class="xl26" align="center" height="1" valign="top" width="180">Exhaust pipe M18 x 1.5</td> <td colspan="2" class="xl35" align="center" height="1" valign="top" width="135">manual tightening</td> <td class="xl26" align="center" height="1" width="14">L243</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="6" valign="top" width="367">Head "2" (rear)</td> <td class="xl26" align="center" height="6" valign="top" width="39">1</td> <td class="xl26" align="center" height="6" valign="top" width="180">Exhaust pipe M18 x 1.5</td> <td colspan="2" class="xl35" align="center" height="6" valign="top" width="135">manual tightening</td> <td class="xl26" align="center" height="6" width="14">L243</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="5" valign="top" width="367">Camshaft support / head "2" (rear)</td> <td class="xl26" align="center" height="5" valign="top" width="39">4</td> <td class="xl26" align="center" height="5" valign="top" width="180">Screw T.C.E.I. M6 x 30</td> <td class="xl26" align="center" height="5" valign="top" width="58">11</td> <td class="xl29" align="center" height="5" valign="top" width="71">8.1</td> <td class="xl26" align="center" height="5" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="10" valign="top" width="367">Camshaft support / head "2" (rear)</td> <td class="xl26" align="center" height="10" valign="top" width="39">2</td> <td class="xl26" align="center" height="10" valign="top" width="180">Screw T.C.E.I. M6 x 45</td> <td class="xl26" align="center" height="10" valign="top" width="58">11</td> <td class="xl29" align="center" height="10" valign="top" width="71">8.1</td> <td class="xl26" align="center" height="10" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="5" valign="top" width="367">Camshaft support / head "2" (rear)</td> <td class="xl26" align="center" height="5" valign="top" width="39">2</td> <td class="xl26" align="center" height="5" valign="top" width="180">Screw T.C.E.I. M6 x 55</td> <td class="xl26" align="center" height="5" valign="top" width="58">11</td> <td class="xl29" align="center" height="5" valign="top" width="71">8.1</td> <td class="xl26" align="center" height="5" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Head "2" (rear)</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">Plug screw M18 x 1.5</td> <td colspan="2" class="xl35" align="center" height="20" valign="top" width="135">manual tightening</td> <td class="xl26" align="center" height="20" width="14">L243</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Head / exhaust</td> <td class="xl26" align="center" height="20" valign="top" width="39">6</td> <td class="xl26" align="center" height="20" valign="top" width="180">Stud bolt M8 x 16/20</td> <td class="xl26" align="center" height="20" valign="top" width="58">10</td> <td class="xl29" align="center" height="20" valign="top" width="71">7.4</td> <td class="xl26" align="center" height="20" width="14">L648</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Head "2" (rear)</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">Angular union</td> <td class="xl26" align="center" height="20" valign="top" width="58"> </td> <td class="xl29" align="center" height="20" valign="top" width="71"> </td> <td class="xl26" align="center" height="20" width="14">L574</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Head / case</td> <td class="xl26" align="center" height="20" valign="top" width="39">8</td> <td class="xl26" align="center" height="20" valign="top" width="180">Stud bolt M10 x 171</td> <td class="xl26" align="center" height="20" valign="top" width="58">10</td> <td class="xl29" align="center" height="20" valign="top" width="71">7.4</td> <td class="xl26" align="center" height="20" width="14">L243</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Cylinder / head non varnished cylinder version</td> <td class="xl26" align="center" height="20" valign="top" width="39">8</td> <td class="xl26" align="center" height="20" valign="top" width="180">M8 x 45</td> <td class="xl26" align="center" height="20" valign="top" width="58">28-30</td> <td class="xl29" align="center" height="20" valign="top" width="71">20.6-22.1</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Cylinder / head varnished cylinder version</td> <td class="xl26" align="center" height="20" valign="top" width="39">8</td> <td class="xl26" align="center" height="20" valign="top" width="180">M8 x 45</td> <td class="xl26" align="center" height="20" valign="top" width="58">25-28</td> <td class="xl29" align="center" height="20" valign="top" width="71">18.4-20.6</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Head / stud bolt not varnished head version</td> <td class="xl26" align="center" height="20" valign="top" width="39">8</td> <td class="xl26" align="center" height="20" valign="top" width="180">Nut M10</td> <td class="xl26" align="center" height="20" valign="top" width="58">58</td> <td class="xl29" align="center" height="20" valign="top" width="71">42.7</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="5" valign="top" width="367">Head / stud bolt varnished head version</td> <td class="xl26" align="center" height="5" valign="top" width="39">8</td> <td class="xl26" align="center" height="5" valign="top" width="180">Nut M10</td> <td class="xl26" align="center" height="5" valign="top" width="58">50-55</td> <td class="xl29" align="center" height="5" valign="top" width="71">36.8- 40.5</td> <td class="xl26" align="center" height="5" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Head / stud bolt varnished version with nut on outer side</td> <td class="xl26" align="center" height="20" valign="top" width="39">8</td> <td class="xl26" align="center" height="20" valign="top" width="180">Nut M10</td> <td class="xl26" align="center" height="20" valign="top" width="58">58</td> <td class="xl29" align="center" height="20" valign="top" width="71">42.7</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="7" valign="top" width="367">Head / chain compartment</td> <td class="xl26" align="center" height="7" valign="top" width="39">4</td> <td class="xl26" align="center" height="7" valign="top" width="180">Screw T.C.E.I. M6 x 100</td> <td class="xl26" align="center" height="7" valign="top" width="58">12</td> <td class="xl29" align="center" height="7" valign="top" width="71">8.8</td> <td class="xl26" align="center" height="7" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Head "2" (rear) / bearing flange</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">Screw T.E. M6 x 35</td> <td class="xl26" align="center" height="20" valign="top" width="58">11</td> <td class="xl29" align="center" height="20" valign="top" width="71">8.1</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Head "2" (rear) / bearing flange</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">Screw T.E. M6 x 20</td> <td class="xl26" align="center" height="20" valign="top" width="58">11</td> <td class="xl29" align="center" height="20" valign="top" width="71">8.1</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Head "2" (rear) / differential transmission - exhaust camshaft</td> <td class="xl26" align="center" height="20" valign="top" width="39">3</td> <td class="xl26" align="center" height="20" valign="top" width="180">Screw T.E. M6 x 14</td> <td class="xl26" align="center" height="20" valign="top" width="58">11</td> <td class="xl29" align="center" height="20" valign="top" width="71">8.1</td> <td class="xl26" align="center" height="20" width="14">L243</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="1" valign="top" width="367">Drive gear / induction camshaft</td> <td class="xl26" align="center" height="1" valign="top" width="39">6</td> <td class="xl26" align="center" height="1" valign="top" width="180">Screw T.C.E.I. M6 x 11.5</td> <td class="xl26" align="center" height="1" valign="top" width="58">11</td> <td class="xl29" align="center" height="1" valign="top" width="71">8.1</td> <td class="xl26" align="center" height="1" width="14">L243</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="1" valign="top" width="367">Head "1" (front) / gear - exhaust camshaft</td> <td class="xl26" align="center" height="1" valign="top" width="39">3</td> <td class="xl26" align="center" height="1" valign="top" width="180">Screw T.C.E.I. M6 x 11.5</td> <td class="xl26" align="center" height="1" valign="top" width="58">11</td> <td class="xl29" align="center" height="1" valign="top" width="71">8.1</td> <td class="xl26" align="center" height="1" width="14">L243</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Head "2" (rear) / differential transmission upper side</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">Nut M14 x 1</td> <td class="xl26" align="center" height="20" valign="top" width="58">50</td> <td class="xl29" align="center" height="20" valign="top" width="71">36.8</td> <td class="xl26" align="center" height="20" width="14">L243</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="1" valign="top" width="367">Valve cover</td> <td class="xl26" align="center" height="1" valign="top" width="39">10</td> <td class="xl26" align="center" height="1" valign="top" width="180">Spacer screw M6 x 23</td> <td class="xl26" align="center" height="1" valign="top" width="58">9</td> <td class="xl29" align="center" height="1" valign="top" width="71">6.6</td> <td class="xl26" align="center" height="1" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="1" valign="top" width="367">Head "1" (front) / chain guide shoe</td> <td class="xl26" align="center" height="1" valign="top" width="39">2</td> <td class="xl26" align="center" height="1" valign="top" width="180">Spacer screw M6 x 16</td> <td class="xl26" align="center" height="1" valign="top" width="58">11</td> <td class="xl29" align="center" height="1" valign="top" width="71">8.1</td> <td class="xl26" align="center" height="1" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Head</td> <td class="xl26" align="center" height="20" valign="top" width="39">4</td> <td class="xl26" align="center" height="20" valign="top" width="180">Spark plug</td> <td class="xl26" align="center" height="20" valign="top" width="58">18</td> <td class="xl29" align="center" height="20" valign="top" width="71">13.3</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="4" valign="top" width="367">Induction flange</td> <td class="xl26" align="center" height="4" valign="top" width="39">4</td> <td class="xl26" align="center" height="4" valign="top" width="180">Screw T.C.E.I. M8 x 25</td> <td class="xl26" align="center" height="4" valign="top" width="58">19</td> <td class="xl29" align="center" height="4" valign="top" width="71">14.0</td> <td class="xl26" align="center" height="4" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Cylinder / chain tightener</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">Plug screw M16 x 1.5</td> <td class="xl26" align="center" height="20" valign="top" width="58">30</td> <td class="xl29" align="center" height="20" valign="top" width="71">22.1</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="1" valign="top" width="367">Head "1" (front)</td> <td class="xl26" align="center" height="1" valign="top" width="39">1</td> <td class="xl26" align="center" height="1" valign="top" width="180">Coolant temp. thermistor</td> <td class="xl26" align="center" height="1" valign="top" width="58">20</td> <td class="xl29" align="center" height="1" valign="top" width="71">14.7</td> <td class="xl26" align="center" height="1" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="3" valign="top" width="367">Head "2" (rear)</td> <td class="xl26" align="center" height="3" valign="top" width="39">1</td> <td class="xl26" align="center" height="3" valign="top" width="180">Coolant temp. thermistor</td> <td class="xl26" align="center" height="3" valign="top" width="58">20</td> <td class="xl29" align="center" height="3" valign="top" width="71">14.7</td> <td class="xl26" align="center" height="3" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="4" valign="top" width="367">Cylinder bracket support shoe</td> <td class="xl26" align="center" height="4" valign="top" width="39">2</td> <td class="xl26" align="center" height="4" valign="top" width="180">Screw T.C.E.I. M10 x 40</td> <td class="xl26" align="center" height="4" valign="top" width="58">40</td> <td class="xl29" align="center" height="4" valign="top" width="71">29.5</td> <td class="xl26" align="center" height="4" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Cylinder bracket support shoe</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">Nut M10</td> <td class="xl26" align="center" height="20" valign="top" width="58">40</td> <td class="xl29" align="center" height="20" valign="top" width="71">29.5</td> <td class="xl26" align="center" height="20" width="14">L243</td> </tr> <tr style="height:15.75pt" height="21"> <td colspan="6" class="xl37" bgcolor="#C0C0C0" height="20" valign="top" width="759">
Ignition system, starter motor
</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl31" height="20" valign="top" width="367">Description</td> <td class="xl25" align="center" height="20" valign="top" width="39">Qty</td> <td class="xl25" align="center" height="20" valign="top" width="180">Screw/ Nut</td> <td class="xl25" align="center" height="20" valign="top" width="58">Nm</td> <td class="xl28" align="center" height="20" valign="top" width="71">ft-lb</td> <td class="xl25" align="center" height="20" width="14">Note</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="1" valign="top" width="367">Driving shaft position sensor / flywheel cover</td> <td class="xl26" align="center" height="1" valign="top" width="39">2</td> <td class="xl26" align="center" height="1" valign="top" width="180">Taptite screw M6 x 16</td> <td class="xl26" align="center" height="1" valign="top" width="58">11</td> <td class="xl29" align="center" height="1" valign="top" width="71">8.1</td> <td class="xl26" align="center" height="1" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="6" valign="top" width="367">Flywheel cover / generator</td> <td class="xl26" align="center" height="6" valign="top" width="39">3</td> <td class="xl26" align="center" height="6" valign="top" width="180">Screw T.C.E.I. M6 x 40</td> <td class="xl26" align="center" height="6" valign="top" width="58">11</td> <td class="xl29" align="center" height="6" valign="top" width="71">8.1</td> <td class="xl26" align="center" height="6" width="14">L243</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="6" valign="top" width="367">Magnetic gear - unidirectional case</td> <td class="xl26" align="center" height="6" valign="top" width="39"> </td> <td class="xl26" align="center" height="6" valign="top" width="180"> </td> <td class="xl26" align="center" height="6" valign="top" width="58"> </td> <td class="xl29" align="center" height="6" valign="top" width="71"> </td> <td class="xl26" align="center" height="6" width="14">L648</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="6" valign="top" width="367">Free wheel flange</td> <td class="xl26" align="center" height="6" valign="top" width="39">3</td> <td class="xl26" align="center" height="6" valign="top" width="180">Screw T.C.E.I. M8 x 16</td> <td class="xl26" align="center" height="6" valign="top" width="58">30</td> <td class="xl29" align="center" height="6" valign="top" width="71">22.1</td> <td class="xl26" align="center" height="6" width="14">L648</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="6" valign="top" width="367">Magnetic gear cone</td> <td class="xl26" align="center" height="6" valign="top" width="39"> </td> <td class="xl26" align="center" height="6" valign="top" width="180"> </td> <td class="xl26" align="center" height="6" valign="top" width="58"> </td> <td class="xl29" align="center" height="6" valign="top" width="71"> </td> <td class="xl26" align="center" height="6" width="14">L648</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="6" valign="top" width="367">Ignition / driving shaft</td> <td class="xl26" align="center" height="6" valign="top" width="39">1</td> <td class="xl26" align="center" height="6" valign="top" width="180">Screw T.C.E.I. M6 x 30</td> <td class="xl26" align="center" height="6" valign="top" width="58">130</td> <td class="xl29" align="center" height="6" valign="top" width="71">95.8</td> <td class="xl26" align="center" height="6" width="14">L648</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="6" valign="top" width="367">Ignition device cover / MS casing</td> <td class="xl26" align="center" height="6" valign="top" width="39">12</td> <td class="xl26" align="center" height="6" valign="top" width="180">Screw T.C.E.I. M6 x 35</td> <td class="xl26" align="center" height="6" valign="top" width="58">11</td> <td class="xl29" align="center" height="6" valign="top" width="71">8.1</td> <td class="xl26" align="center" height="6" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="6" valign="top" width="367">Ignition device cover </td> <td class="xl26" align="center" height="6" valign="top" width="39">1</td> <td class="xl26" align="center" height="6" valign="top" width="180">Plug screw M24 x 1.5</td> <td class="xl26" align="center" height="6" valign="top" width="58">3</td> <td class="xl29" align="center" height="6" valign="top" width="71">2.2</td> <td class="xl26" align="center" height="6" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="6" valign="top" width="367">Camshaft position sensor / head "1" (front)</td> <td class="xl26" align="center" height="6" valign="top" width="39">2</td> <td class="xl26" align="center" height="6" valign="top" width="180">Taptite screw M5 x 12</td> <td class="xl26" align="center" height="6" valign="top" width="58">4</td> <td class="xl29" align="center" height="6" valign="top" width="71">2.9</td> <td class="xl26" align="center" height="6" width="14">L243</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="6" valign="top" width="367">Starter motor</td> <td class="xl26" align="center" height="6" valign="top" width="39">2</td> <td class="xl26" align="center" height="6" valign="top" width="180">Screw T.C.E.I. M6 x 30</td> <td class="xl26" align="center" height="6" valign="top" width="58">11</td> <td class="xl29" align="center" height="6" valign="top" width="71">8.1</td> <td class="xl26" align="center" height="6" width="14"> </td> </tr> <tr style="height:15.75pt" height="21"> <td colspan="6" class="xl37" bgcolor="#C0C0C0" height="20" valign="top" width="759">
Clutch cover, coolant pump
</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl31" height="20" valign="top" width="367">Description</td> <td class="xl25" align="center" height="20" valign="top" width="39">Qty</td> <td class="xl25" align="center" height="20" valign="top" width="180">Screw/ Nut</td> <td class="xl25" align="center" height="20" valign="top" width="58">Nm</td> <td class="xl28" align="center" height="20" valign="top" width="71">ft-lb</td> <td class="xl25" align="center" height="20" width="14">Note</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Coolant pump</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">Impeller</td> <td colspan="2" class="xl35" align="center" height="20" valign="top" width="135">manual tightening</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="38" valign="top" width="367">Clutch cover</td> <td class="xl26" align="center" height="38" valign="top" width="39">1</td> <td class="xl26" align="center" height="38" valign="top" width="180">Oil pressure switch M10 x 1</td> <td class="xl26" align="center" height="38" valign="top" width="58">15</td> <td class="xl29" align="center" height="38" valign="top" width="71">11.1</td> <td class="xl26" align="center" height="38" width="14">L243</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="6" valign="top" width="367">Coolant pump casing</td> <td class="xl26" align="center" height="6" valign="top" width="39">1</td> <td class="xl26" align="center" height="6" valign="top" width="180">Screw T.C.E.I. M6 x 25</td> <td class="xl26" align="center" height="6" valign="top" width="58">11</td> <td class="xl29" align="center" height="6" valign="top" width="71">8.1</td> <td class="xl26" align="center" height="6" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="6" valign="top" width="367">Coolant pump casing</td> <td class="xl26" align="center" height="6" valign="top" width="39">3</td> <td class="xl26" align="center" height="6" valign="top" width="180">Screw T.C.E.I. M6 x 55</td> <td class="xl26" align="center" height="6" valign="top" width="58">11</td> <td class="xl29" align="center" height="6" valign="top" width="71">8.1</td> <td class="xl26" align="center" height="6" width="14">L243</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="6" valign="top" width="367">Clutch cover</td> <td class="xl26" align="center" height="6" valign="top" width="39">11</td> <td class="xl26" align="center" height="6" valign="top" width="180">Screw T.C.E.I. M6 x 35</td> <td class="xl26" align="center" height="6" valign="top" width="58">11</td> <td class="xl29" align="center" height="6" valign="top" width="71">8.1</td> <td class="xl26" align="center" height="6" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="6" valign="top" width="367">Clutch cover</td> <td class="xl26" align="center" height="6" valign="top" width="39">3</td> <td class="xl26" align="center" height="6" valign="top" width="180">Screw T.C.E.I. M8 x 40</td> <td class="xl26" align="center" height="6" valign="top" width="58">19</td> <td class="xl29" align="center" height="6" valign="top" width="71">14.0</td> <td class="xl26" align="center" height="6" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="6" valign="top" width="367">Clutch cover</td> <td class="xl26" align="center" height="6" valign="top" width="39">1</td> <td class="xl26" align="center" height="6" valign="top" width="180">Screw T.C.E.I. M8 x 65</td> <td class="xl26" align="center" height="6" valign="top" width="58">19</td> <td class="xl29" align="center" height="6" valign="top" width="71">14.0</td> <td class="xl26" align="center" height="6" width="14"> </td> </tr> <tr style="height:20.25pt" height="27"> <td colspan="6" class="xl36" bgcolor="#999999" height="6" valign="top" width="759">
Rear Fork
</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl31" height="20" valign="top" width="367">Description</td> <td class="xl25" align="center" height="20" valign="top" width="39">Qty</td> <td class="xl25" align="center" height="20" valign="top" width="180">Screw/ Nut</td> <td class="xl25" align="center" height="20" valign="top" width="58">Nm</td> <td class="xl28" align="center" height="20" valign="top" width="71">ft-lb</td> <td class="xl25" align="center" height="20" width="14">Note</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fork pin metal ring</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M30 x 1.5</td> <td class="xl26" align="center" height="20" valign="top" width="58">12</td> <td class="xl29" align="center" height="20" valign="top" width="71">8.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fork pin lock ring</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M30 x 1.5</td> <td class="xl26" align="center" height="20" valign="top" width="58">60</td> <td class="xl29" align="center" height="20" valign="top" width="71">44.2</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fork pin nut</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M20 x 1.5</td> <td class="xl26" align="center" height="20" valign="top" width="58">90</td> <td class="xl29" align="center" height="20" valign="top" width="71">66.3</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Caliper mount locking pin</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M12</td> <td class="xl26" align="center" height="20" valign="top" width="58">50</td> <td class="xl29" align="center" height="20" valign="top" width="71">36.8</td> <td class="xl26" align="center" height="20" width="14">L243</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl33" height="20" valign="top" width="367">Chain tightener screw and nut</td> <td class="xl26" align="center" height="20" valign="top" width="39">1+1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M8</td> <td colspan="2" class="xl35" align="center" height="20" valign="top" width="135">manual tightening</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Brake pipe grommet fastening</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M5</td> <td class="xl26" align="center" height="20" valign="top" width="58">4</td> <td class="xl29" align="center" height="20" valign="top" width="71">2.9</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Chain case fastening</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M5</td> <td class="xl26" align="center" height="20" valign="top" width="58">4</td> <td class="xl29" align="center" height="20" valign="top" width="71">2.9</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Chain tightener shoe fastening</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M5</td> <td class="xl26" align="center" height="20" valign="top" width="58">2</td> <td class="xl29" align="center" height="20" valign="top" width="71">1.5</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Rear mudguard fastening</td> <td class="xl26" align="center" height="20" valign="top" width="39">2+2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M5</td> <td class="xl26" align="center" height="20" valign="top" width="58">3</td> <td class="xl29" align="center" height="20" valign="top" width="71">2.2</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:20.25pt" height="27"> <td colspan="6" class="xl36" bgcolor="#999999" height="23" valign="top" width="759">
Side Stand
</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl31" height="20" valign="top" width="367">Description</td> <td class="xl25" align="center" height="20" valign="top" width="39">Qty</td> <td class="xl25" align="center" height="20" valign="top" width="180">Screw/ Nut</td> <td class="xl25" align="center" height="20" valign="top" width="58">Nm</td> <td class="xl28" align="center" height="20" valign="top" width="71">ft-lb</td> <td class="xl25" align="center" height="20" width="14">Note</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of stand plate to frame</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M10</td> <td class="xl26" align="center" height="20" valign="top" width="58">40</td> <td class="xl29" align="center" height="20" valign="top" width="71">29.5</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Stand fastening pin</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M10 x 1.25</td> <td class="xl26" align="center" height="20" valign="top" width="58">10</td> <td class="xl29" align="center" height="20" valign="top" width="71">7.4</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Switch fastening screw</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">10</td> <td class="xl29" align="center" height="20" valign="top" width="71">7.4</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Lock nut</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M10 x 1.25</td> <td class="xl26" align="center" height="20" valign="top" width="58">25</td> <td class="xl29" align="center" height="20" valign="top" width="71">18.4</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:20.25pt" height="27"> <td class="xl34" colspan="6" bgcolor="#999999" height="24" valign="top" width="759">
Front Suspension
</td> </tr> <tr style="height:15.75pt" height="21"> <td colspan="6" class="xl37" bgcolor="#C0C0C0" height="20" valign="top" width="759">
Front fork
</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl31" height="20" valign="top" width="367">Description</td> <td class="xl25" align="center" height="20" valign="top" width="39">Qty</td> <td class="xl25" align="center" height="20" valign="top" width="180">Screw/ Nut</td> <td class="xl25" align="center" height="20" valign="top" width="58">Nm</td> <td class="xl28" align="center" height="20" valign="top" width="71">ft-lb</td> <td class="xl25" align="center" height="20" width="14">Note</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of upper plate on fork tubes</td> <td class="xl26" align="center" height="20" valign="top" width="39">1+1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M8</td> <td class="xl26" align="center" height="20" valign="top" width="58">25</td> <td class="xl29" align="center" height="20" valign="top" width="71">18.4</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of upper plate on fork tubes</td> <td class="xl26" align="center" height="20" valign="top" width="39">2+2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M8</td> <td class="xl26" align="center" height="20" valign="top" width="58">25</td> <td class="xl29" align="center" height="20" valign="top" width="71">18.4</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Steering head metal ring</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M35 x 1</td> <td class="xl26" align="center" height="20" valign="top" width="58">40</td> <td class="xl29" align="center" height="20" valign="top" width="71">29.5</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="38" valign="top" width="367">Steering head lock ring</td> <td class="xl26" align="center" height="38" valign="top" width="39">1</td> <td class="xl26" align="center" height="38" valign="top" width="180">M35 x 1</td> <td colspan="3" class="xl38" align="center" height="38" valign="top" width="155">manual tight plus 90 degrees</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Upper plate fastening bush</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M29 x 1</td> <td class="xl26" align="center" height="20" valign="top" width="58">80</td> <td class="xl29" align="center" height="20" valign="top" width="71">59.0</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Lower plate travel-end bush fastening screw</td> <td class="xl26" align="center" height="20" valign="top" width="39">1+1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M8</td> <td class="xl26" align="center" height="20" valign="top" width="58">22</td> <td class="xl29" align="center" height="20" valign="top" width="71">16.2</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Closing of fork / wheel pin clamps</td> <td class="xl26" align="center" height="20" valign="top" width="39">2+2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M8</td> <td class="xl26" align="center" height="20" valign="top" width="58">22</td> <td class="xl29" align="center" height="20" valign="top" width="71">16.2</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:15.75pt" height="21"> <td colspan="6" class="xl37" bgcolor="#C0C0C0" height="20" valign="top" width="759">
Steering Shock Absorbers
</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl31" height="20" valign="top" width="367">Description</td> <td class="xl25" align="center" height="20" valign="top" width="39">Qty</td> <td class="xl25" align="center" height="20" valign="top" width="180">Screw/ Nut</td> <td class="xl25" align="center" height="20" valign="top" width="58">Nm</td> <td class="xl28" align="center" height="20" valign="top" width="71">ft-lb</td> <td class="xl25" align="center" height="20" width="14">Note</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="38" valign="top" width="367">Fastening of shock absorb collar on dashboard/front fairing mount</td> <td class="xl26" align="center" height="38" valign="top" width="39">1</td> <td class="xl26" align="center" height="38" valign="top" width="180">M6</td> <td class="xl26" align="center" height="38" valign="top" width="58">12</td> <td class="xl29" align="center" height="38" valign="top" width="71">8.8</td> <td class="xl26" align="center" height="38" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Tube end lock nut</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M8</td> <td class="xl26" align="center" height="20" valign="top" width="58">12</td> <td class="xl29" align="center" height="20" valign="top" width="71">8.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Screw fastening collar on shock absorber tube on lower plate</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M5</td> <td class="xl26" align="center" height="20" valign="top" width="58">5</td> <td class="xl29" align="center" height="20" valign="top" width="71">3.7</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of shock absorber tube on lower plate</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">12</td> <td class="xl29" align="center" height="20" valign="top" width="71">8.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:20.25pt" height="27"> <td colspan="6" class="xl36" bgcolor="#999999" height="23" valign="top" width="759">
Rear Suspension
</td> </tr> <tr style="height:15.75pt" height="21"> <td colspan="6" class="xl37" bgcolor="#C0C0C0" height="20" valign="top" width="759">
Shock absorber
</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl31" height="20" valign="top" width="367">Description</td> <td class="xl25" align="center" height="20" valign="top" width="39">Qty</td> <td class="xl25" align="center" height="20" valign="top" width="180">Screw/ Nut</td> <td class="xl25" align="center" height="20" valign="top" width="58">Nm</td> <td class="xl28" align="center" height="20" valign="top" width="71">ft-lb</td> <td class="xl25" align="center" height="20" width="14">Note</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of shock absorber to frame</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M10</td> <td class="xl26" align="center" height="20" valign="top" width="58">50</td> <td class="xl29" align="center" height="20" valign="top" width="71">36.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:15.75pt" height="21"> <td colspan="6" class="xl37" bgcolor="#C0C0C0" height="20" valign="top" width="759">
Linkage
</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl31" height="20" valign="top" width="367">Description</td> <td class="xl25" align="center" height="20" valign="top" width="39">Qty</td> <td class="xl25" align="center" height="20" valign="top" width="180">Screw/ Nut</td> <td class="xl25" align="center" height="20" valign="top" width="58">Nm</td> <td class="xl28" align="center" height="20" valign="top" width="71">ft-lb</td> <td class="xl25" align="center" height="20" width="14">Note</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of single connecting rod to frame</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M10</td> <td class="xl26" align="center" height="20" valign="top" width="58">50</td> <td class="xl29" align="center" height="20" valign="top" width="71">36.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of single/double connecting rod to frame</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M10</td> <td class="xl26" align="center" height="20" valign="top" width="58">50</td> <td class="xl29" align="center" height="20" valign="top" width="71">36.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of double connecting rod fork</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M10</td> <td class="xl26" align="center" height="20" valign="top" width="58">50</td> <td class="xl29" align="center" height="20" valign="top" width="71">36.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of double connecting rod / shock absorber</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M10</td> <td class="xl26" align="center" height="20" valign="top" width="58">50</td> <td class="xl29" align="center" height="20" valign="top" width="71">36.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:20.25pt" height="27"> <td colspan="6" class="xl36" bgcolor="#999999" height="23" valign="top" width="759">
Electrical System
</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl31" height="20" valign="top" width="367">Description</td> <td class="xl25" align="center" height="20" valign="top" width="39">Qty</td> <td class="xl25" align="center" height="20" valign="top" width="180">Screw/ Nut</td> <td class="xl25" align="center" height="20" valign="top" width="58">Nm</td> <td class="xl28" align="center" height="20" valign="top" width="71">ft-lb</td> <td class="xl25" align="center" height="20" width="14">Note</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of battery clamping bracket</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">12</td> <td class="xl29" align="center" height="20" valign="top" width="71">8.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of horn mount</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M8 x 1.25</td> <td class="xl26" align="center" height="20" valign="top" width="58">25</td> <td class="xl29" align="center" height="20" valign="top" width="71">18.4</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of speed sensor on rear brake caliper mount</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">12</td> <td class="xl29" align="center" height="20" valign="top" width="71">8.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of rear indicators</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl27" align="center" height="20" valign="top" width="58">2-3</td> <td class="xl29" align="center" height="20" valign="top" width="71">1.5-2.2</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of electronic unit protection case</td> <td class="xl26" align="center" height="20" valign="top" width="39">3</td> <td class="xl26" align="center" height="20" valign="top" width="180">SWP3.9</td> <td class="xl26" align="center" height="20" valign="top" width="58">1</td> <td class="xl29" align="center" height="20" valign="top" width="71">0.7</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of voltage regulator</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">12</td> <td class="xl29" align="center" height="20" valign="top" width="71">8.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of front indicators</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl27" align="center" height="20" valign="top" width="58">2-3</td> <td class="xl29" align="center" height="20" valign="top" width="71">1.5-2.2</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of coil to mount</td> <td class="xl26" align="center" height="20" valign="top" width="39">8</td> <td class="xl26" align="center" height="20" valign="top" width="180">M5</td> <td class="xl26" align="center" height="20" valign="top" width="58">5</td> <td class="xl29" align="center" height="20" valign="top" width="71">3.7</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of rear light to rear fairing end</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">SWP3.9</td> <td class="xl26" align="center" height="20" valign="top" width="58">1.5</td> <td class="xl29" align="center" height="20" valign="top" width="71">1.1</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of headlight to front fairing</td> <td class="xl26" align="center" height="20" valign="top" width="39">3</td> <td class="xl26" align="center" height="20" valign="top" width="180">SWP3.9</td> <td class="xl26" align="center" height="20" valign="top" width="58">1.5</td> <td class="xl29" align="center" height="20" valign="top" width="71">1.1</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of headlight to front fairing</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">4</td> <td class="xl29" align="center" height="20" valign="top" width="71">2.9</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of relay box to dashboard/front fairing mount</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">4</td> <td class="xl29" align="center" height="20" valign="top" width="71">2.9</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of fuse box to dashboard/front fairing</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">3</td> <td class="xl29" align="center" height="20" valign="top" width="71">2.2</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of earth to frame</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">12</td> <td class="xl29" align="center" height="20" valign="top" width="71">8.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:20.25pt" height="27"> <td colspan="6" class="xl36" bgcolor="#999999" height="23" valign="top" width="759">
Air Filter Casing
</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl31" height="20" valign="top" width="367">Description</td> <td class="xl25" align="center" height="20" valign="top" width="39">Qty</td> <td class="xl25" align="center" height="20" valign="top" width="180">Screw/ Nut</td> <td class="xl25" align="center" height="20" valign="top" width="58">Nm</td> <td class="xl28" align="center" height="20" valign="top" width="71">ft-lb</td> <td class="xl25" align="center" height="20" width="14">Note</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of air filter casing cover</td> <td class="xl26" align="center" height="20" valign="top" width="39">7</td> <td class="xl26" align="center" height="20" valign="top" width="180">M5</td> <td class="xl26" align="center" height="20" valign="top" width="58">4</td> <td class="xl29" align="center" height="20" valign="top" width="71">2.9</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of air filter casing to throttle body</td> <td class="xl26" align="center" height="20" valign="top" width="39">6</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">8</td> <td class="xl29" align="center" height="20" valign="top" width="71">5.9</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of intake conveyors</td> <td class="xl26" align="center" height="20" valign="top" width="39">4</td> <td class="xl26" align="center" height="20" valign="top" width="180">SWP3.9</td> <td class="xl26" align="center" height="20" valign="top" width="58">1</td> <td class="xl29" align="center" height="20" valign="top" width="71">0.7</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of air sensor support plate</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">SWP3.9</td> <td class="xl26" align="center" height="20" valign="top" width="58">1.5</td> <td class="xl29" align="center" height="20" valign="top" width="71">1.1</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:20.25pt" height="27"> <td colspan="6" class="xl36" bgcolor="#999999" height="23" valign="top" width="759">
Front Wheel
</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl31" height="20" valign="top" width="367">Description</td> <td class="xl25" align="center" height="20" valign="top" width="39">Qty</td> <td class="xl25" align="center" height="20" valign="top" width="180">Screw/ Nut</td> <td class="xl25" align="center" height="20" valign="top" width="58">Nm</td> <td class="xl28" align="center" height="20" valign="top" width="71">ft-lb</td> <td class="xl25" align="center" height="20" width="14">Note</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Wheel pin nut</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M25 x 1.5</td> <td class="xl26" align="center" height="20" valign="top" width="58">80</td> <td class="xl29" align="center" height="20" valign="top" width="71">59.0</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:20.25pt" height="27"> <td colspan="6" class="xl36" bgcolor="#999999" height="23" valign="top" width="759">
Rear Wheel
</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl31" height="20" valign="top" width="367">Description</td> <td class="xl25" align="center" height="20" valign="top" width="39">Qty</td> <td class="xl25" align="center" height="20" valign="top" width="180">Screw/ Nut</td> <td class="xl25" align="center" height="20" valign="top" width="58">Nm</td> <td class="xl28" align="center" height="20" valign="top" width="71">ft-lb</td> <td class="xl25" align="center" height="20" width="14">Note</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of sprocket on sprocket holder</td> <td class="xl26" align="center" height="20" valign="top" width="39">5</td> <td class="xl26" align="center" height="20" valign="top" width="180">M10</td> <td class="xl26" align="center" height="20" valign="top" width="58">50</td> <td class="xl29" align="center" height="20" valign="top" width="71">36.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Wheel pin nut</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M25 x 1.5</td> <td class="xl26" align="center" height="20" valign="top" width="58">120</td> <td class="xl29" align="center" height="20" valign="top" width="71">88.4</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:20.25pt" height="27"> <td colspan="6" class="xl36" bgcolor="#999999" height="23" valign="top" width="759">
Cooling System
</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl31" height="20" valign="top" width="367">Description</td> <td class="xl25" align="center" height="20" valign="top" width="39">Qty</td> <td class="xl25" align="center" height="20" valign="top" width="180">Screw/ Nut</td> <td class="xl25" align="center" height="20" valign="top" width="58">Nm</td> <td class="xl28" align="center" height="20" valign="top" width="71">ft-lb</td> <td class="xl25" align="center" height="20" width="14">Note</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Thermal switch on 3-way manifold</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M14 x 1.5</td> <td class="xl26" align="center" height="20" valign="top" width="58">30</td> <td class="xl29" align="center" height="20" valign="top" width="71">22.1</td> <td class="xl26" align="center" height="20" width="14">L572</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of electrofan mount</td> <td class="xl26" align="center" height="20" valign="top" width="39">2+2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">6</td> <td class="xl29" align="center" height="20" valign="top" width="71">4.4</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of electrofan motor to mount</td> <td class="xl26" align="center" height="20" valign="top" width="39">3+3</td> <td class="xl26" align="center" height="20" valign="top" width="180">M4</td> <td class="xl26" align="center" height="20" valign="top" width="58">2</td> <td class="xl29" align="center" height="20" valign="top" width="71">1.5</td> <td class="xl26" align="center" height="20" width="14">L243</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Radiator coolant drain screws</td> <td class="xl26" align="center" height="20" valign="top" width="39">1+1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">10</td> <td class="xl29" align="center" height="20" valign="top" width="71">7.4</td> <td class="xl26" align="center" height="20" width="14">L572</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of expansive tank to coils mount</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">10</td> <td class="xl29" align="center" height="20" valign="top" width="71">7.4</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="1" valign="top" width="367">Fastening of expansion tank cap</td> <td class="xl26" align="center" height="1" valign="top" width="39">1</td> <td class="xl26" align="center" height="1" valign="top" width="180">M28 x 3</td> <td colspan="3" class="xl35" align="center" height="1" valign="top" width="155">manual tightening </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of coolant filler neck</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">10</td> <td class="xl29" align="center" height="20" valign="top" width="71">7.4</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:20.25pt" height="27"> <td colspan="6" class="xl36" bgcolor="#999999" height="23" valign="top" width="759">
Braking Systems
</td> </tr> <tr style="height:15.75pt" height="21"> <td colspan="6" class="xl37" bgcolor="#C0C0C0" height="20" valign="top" width="759">
Front system
</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl31" height="20" valign="top" width="367">Description</td> <td class="xl25" align="center" height="20" valign="top" width="39">Qty</td> <td class="xl25" align="center" height="20" valign="top" width="180">Screw/ Nut</td> <td class="xl25" align="center" height="20" valign="top" width="58">Nm</td> <td class="xl28" align="center" height="20" valign="top" width="71">ft-lb</td> <td class="xl25" align="center" height="20" width="14">Note</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of right and left brake caliper</td> <td class="xl26" align="center" height="20" valign="top" width="39">2+2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M10 x 1.25</td> <td class="xl26" align="center" height="20" valign="top" width="58">50</td> <td class="xl29" align="center" height="20" valign="top" width="71">36.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of brake fluid tank</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">5</td> <td class="xl29" align="center" height="20" valign="top" width="71">3.7</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of brake fluid tank bracket</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">12</td> <td class="xl29" align="center" height="20" valign="top" width="71">8.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of brake discs</td> <td class="xl26" align="center" height="20" valign="top" width="39">6+6</td> <td class="xl26" align="center" height="20" valign="top" width="180">M8</td> <td class="xl26" align="center" height="20" valign="top" width="58">30</td> <td class="xl29" align="center" height="20" valign="top" width="71">22.1</td> <td class="xl26" align="center" height="20" width="14">L243</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of front brake pipe</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M10 x 1</td> <td class="xl26" align="center" height="20" valign="top" width="58">20</td> <td class="xl29" align="center" height="20" valign="top" width="71">14.7</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of brake fluid bleeder</td> <td class="xl26" align="center" height="20" valign="top" width="39">3</td> <td class="xl26" align="center" height="20" valign="top" width="180">M10 x 1</td> <td class="xl26" align="center" height="20" valign="top" width="58">10</td> <td class="xl29" align="center" height="20" valign="top" width="71">7.4</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:15.75pt" height="21"> <td colspan="6" class="xl37" bgcolor="#C0C0C0" height="20" valign="top" width="759">
Rear system
</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl31" height="20" valign="top" width="367">Description</td> <td class="xl25" align="center" height="20" valign="top" width="39">Qty</td> <td class="xl25" align="center" height="20" valign="top" width="180">Screw/ Nut</td> <td class="xl25" align="center" height="20" valign="top" width="58">Nm</td> <td class="xl28" align="center" height="20" valign="top" width="71">ft-lb</td> <td class="xl25" align="center" height="20" width="14">Note</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Brake caliper fastening</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M8</td> <td class="xl26" align="center" height="20" valign="top" width="58">25</td> <td class="xl29" align="center" height="20" valign="top" width="71">18.4</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Brake lever pin</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M8</td> <td class="xl26" align="center" height="20" valign="top" width="58">15</td> <td class="xl29" align="center" height="20" valign="top" width="71">11.1</td> <td class="xl26" align="center" height="20" width="14">L243</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of brake fluid tank</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M5</td> <td class="xl26" align="center" height="20" valign="top" width="58">1</td> <td class="xl29" align="center" height="20" valign="top" width="71">0.7</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Brake pump fastening</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">12</td> <td class="xl29" align="center" height="20" valign="top" width="71">8.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Brake rod lock nut</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td colspan="2" class="xl35" align="center" height="20" valign="top" width="135">manual tightening</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Brake disc fastening</td> <td class="xl26" align="center" height="20" valign="top" width="39">5</td> <td class="xl26" align="center" height="20" valign="top" width="180">M8</td> <td class="xl26" align="center" height="20" valign="top" width="58">30</td> <td class="xl29" align="center" height="20" valign="top" width="71">22.1</td> <td class="xl26" align="center" height="20" width="14">L243</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Brake pipe fastening</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M10 x 1</td> <td class="xl26" align="center" height="20" valign="top" width="58">20</td> <td class="xl29" align="center" height="20" valign="top" width="71">14.7</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:20.25pt" height="27"> <td colspan="6" class="xl36" bgcolor="#999999" height="23" valign="top" width="759">
Clutch Control
</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl31" height="20" valign="top" width="367">Description</td> <td class="xl25" align="center" height="20" valign="top" width="39">Qty</td> <td class="xl25" align="center" height="20" valign="top" width="180">Screw/ Nut</td> <td class="xl25" align="center" height="20" valign="top" width="58">Nm</td> <td class="xl28" align="center" height="20" valign="top" width="71">ft-lb</td> <td class="xl25" align="center" height="20" width="14">Note</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of clutch fluid pipe</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M10 x 1</td> <td class="xl26" align="center" height="20" valign="top" width="58">20</td> <td class="xl29" align="center" height="20" valign="top" width="71">14.7</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of fluid tank bracket</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">12</td> <td class="xl29" align="center" height="20" valign="top" width="71">8.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of clutch fluid tank on mount</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M5</td> <td class="xl26" align="center" height="20" valign="top" width="58">3</td> <td class="xl29" align="center" height="20" valign="top" width="71">2.2</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Clutch fluid bleeder</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M10 x 1</td> <td class="xl26" align="center" height="20" valign="top" width="58">10</td> <td class="xl29" align="center" height="20" valign="top" width="71">7.4</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:20.25pt" height="27"> <td colspan="6" class="xl36" bgcolor="#999999" height="23" valign="top" width="759">
Exhaust System
</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl31" height="20" valign="top" width="367">Description</td> <td class="xl25" align="center" height="20" valign="top" width="39">Qty</td> <td class="xl25" align="center" height="20" valign="top" width="180">Screw/ Nut</td> <td class="xl25" align="center" height="20" valign="top" width="58">Nm</td> <td class="xl28" align="center" height="20" valign="top" width="71">ft-lb</td> <td class="xl25" align="center" height="20" width="14">Note</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of exhaust pipes to engine</td> <td class="xl26" align="center" height="20" valign="top" width="39">3+3</td> <td class="xl26" align="center" height="20" valign="top" width="180">M8</td> <td class="xl26" align="center" height="20" valign="top" width="58">25</td> <td class="xl29" align="center" height="20" valign="top" width="71">18.4</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Exhaust silencer fastening</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M8</td> <td class="xl26" align="center" height="20" valign="top" width="58">25</td> <td class="xl29" align="center" height="20" valign="top" width="71">18.4</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:20.25pt" height="27"> <td colspan="6" class="xl36" bgcolor="#999999" height="23" valign="top" width="759">
Fuel Tank
</td> </tr> <tr style="height:15.75pt" height="21"> <td colspan="6" class="xl37" bgcolor="#C0C0C0" height="20" valign="top" width="759">
Fuel pump flange
</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl31" height="20" valign="top" width="367">Description</td> <td class="xl25" align="center" height="20" valign="top" width="39">Qty</td> <td class="xl25" align="center" height="20" valign="top" width="180">Screw/ Nut</td> <td class="xl25" align="center" height="20" valign="top" width="58">Nm</td> <td class="xl28" align="center" height="20" valign="top" width="71">ft-lb</td> <td class="xl25" align="center" height="20" width="14">Note</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fuel return fitting</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">6</td> <td class="xl29" align="center" height="20" valign="top" width="71">4.4</td> <td class="xl26" align="center" height="20" width="14">L243</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of pump mount to flange</td> <td class="xl26" align="center" height="20" valign="top" width="39">3</td> <td class="xl26" align="center" height="20" valign="top" width="180">M5</td> <td class="xl26" align="center" height="20" valign="top" width="58">4</td> <td class="xl29" align="center" height="20" valign="top" width="71">2.9</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of electric terminals on flange</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M5</td> <td class="xl26" align="center" height="20" valign="top" width="58">5</td> <td class="xl29" align="center" height="20" valign="top" width="71">3.7</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Closing of fuel return</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">10</td> <td class="xl29" align="center" height="20" valign="top" width="71">7.4</td> <td class="xl26" align="center" height="20" width="14">L243</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of fuel delivery pipe on flange</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M12 x 1.5</td> <td class="xl26" align="center" height="20" valign="top" width="58">22</td> <td class="xl29" align="center" height="20" valign="top" width="71">16.2</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Petrol level sensor on pump mount</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">SWP 2.9 x 12</td> <td class="xl26" align="center" height="20" valign="top" width="58">1.5</td> <td class="xl29" align="center" height="20" valign="top" width="71">1.1</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of fuel pump cables on flange</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">10</td> <td class="xl29" align="center" height="20" valign="top" width="71">7.4</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:15.75pt" height="21"> <td colspan="6" class="xl37" bgcolor="#C0C0C0" height="20" valign="top" width="759">
Tank
</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl31" height="20" valign="top" width="367">Description</td> <td class="xl25" align="center" height="20" valign="top" width="39">Qty</td> <td class="xl25" align="center" height="20" valign="top" width="180">Screw/ Nut</td> <td class="xl25" align="center" height="20" valign="top" width="58">Nm</td> <td class="xl28" align="center" height="20" valign="top" width="71">ft-lb</td> <td class="xl25" align="center" height="20" width="14">Note</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="19" valign="top" width="367">Fastening of cap on tank</td> <td class="xl26" align="center" height="19" valign="top" width="39">3</td> <td class="xl26" align="center" height="19" valign="top" width="180">M5</td> <td class="xl26" align="center" height="19" valign="top" width="58">5</td> <td class="xl29" align="center" height="19" valign="top" width="71">3.7</td> <td class="xl26" align="center" height="19" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of fuel pump flange on tank</td> <td class="xl26" align="center" height="20" valign="top" width="39">8</td> <td class="xl26" align="center" height="20" valign="top" width="180">M5</td> <td class="xl26" align="center" height="20" valign="top" width="58">7</td> <td class="xl29" align="center" height="20" valign="top" width="71">5.2</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of tank front on frame</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">12</td> <td class="xl29" align="center" height="20" valign="top" width="71">8.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of tank rear on mount</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">12</td> <td class="xl29" align="center" height="20" valign="top" width="71">8.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:20.25pt" height="27"> <td colspan="6" class="xl36" bgcolor="#999999" height="23" valign="top" width="759">
Engine Oil Tank and Radiator
</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl31" height="20" valign="top" width="367">Description</td> <td class="xl25" align="center" height="20" valign="top" width="39">Qty</td> <td class="xl25" align="center" height="20" valign="top" width="180">Screw/ Nut</td> <td class="xl25" align="center" height="20" valign="top" width="58">Nm</td> <td class="xl28" align="center" height="20" valign="top" width="71">ft-lb</td> <td class="xl25" align="center" height="20" width="14">Note</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Tank upper fastenings screw</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">10</td> <td class="xl29" align="center" height="20" valign="top" width="71">7.4</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Tank fastening nuts</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">10</td> <td class="xl29" align="center" height="20" valign="top" width="71">7.4</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Oil filter</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M20 x 1.5</td> <td class="xl26" align="center" height="20" valign="top" width="58">30</td> <td class="xl29" align="center" height="20" valign="top" width="71">22.1</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Oil drain plug</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M8</td> <td class="xl26" align="center" height="20" valign="top" width="58">15</td> <td class="xl29" align="center" height="20" valign="top" width="71">11.1</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Oil level pipe fittings</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M10 x 1</td> <td class="xl26" align="center" height="20" valign="top" width="58">20</td> <td class="xl29" align="center" height="20" valign="top" width="71">14.7</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Radiator astening screws</td> <td class="xl26" align="center" height="20" valign="top" width="39">3</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">12</td> <td class="xl29" align="center" height="20" valign="top" width="71">8.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:20.25pt" height="27"> <td colspan="6" class="xl36" bgcolor="#999999" height="23" valign="top" width="759">
Frame / Fairings
</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl31" height="20" valign="top" width="367">Description</td> <td class="xl25" align="center" height="20" valign="top" width="39">Qty</td> <td class="xl25" align="center" height="20" valign="top" width="180">Screw/ Nut</td> <td class="xl25" align="center" height="20" valign="top" width="58">Nm</td> <td class="xl28" align="center" height="20" valign="top" width="71">ft-lb</td> <td class="xl25" align="center" height="20" width="14">Note</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Radiator spoiler fastening</td> <td class="xl26" align="center" height="20" valign="top" width="39">3</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">5</td> <td class="xl29" align="center" height="20" valign="top" width="71">3.7</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of number plate holder to rear mudguard extension</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M5</td> <td class="xl26" align="center" height="20" valign="top" width="58">2</td> <td class="xl29" align="center" height="20" valign="top" width="71">1.5</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of reflector holder to number plate holder</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M5</td> <td class="xl26" align="center" height="20" valign="top" width="58">6</td> <td class="xl29" align="center" height="20" valign="top" width="71">4.4</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Front mudguard fastening</td> <td class="xl26" align="center" height="20" valign="top" width="39">4</td> <td class="xl26" align="center" height="20" valign="top" width="180">M5</td> <td class="xl26" align="center" height="20" valign="top" width="58">5</td> <td class="xl29" align="center" height="20" valign="top" width="71">3.7</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Rearview mirror fastening screws</td> <td class="xl26" align="center" height="20" valign="top" width="39">1+1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">8</td> <td class="xl29" align="center" height="20" valign="top" width="71">5.9</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of rearview mirror mounts and front fairing to mount</td> <td class="xl26" align="center" height="20" valign="top" width="39">4</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">5</td> <td class="xl29" align="center" height="20" valign="top" width="71">3.7</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Lower fastening of front fairing to conveyors</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M5</td> <td class="xl26" align="center" height="20" valign="top" width="58">4</td> <td class="xl29" align="center" height="20" valign="top" width="71">2.9</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Lower fastening of front fairing (on upper part)</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M5</td> <td class="xl26" align="center" height="20" valign="top" width="58">4</td> <td class="xl29" align="center" height="20" valign="top" width="71">2.9</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of conveyor covers</td> <td class="xl26" align="center" height="20" valign="top" width="39">14</td> <td class="xl26" align="center" height="20" valign="top" width="180">SWP 3.9</td> <td class="xl26" align="center" height="20" valign="top" width="58">2</td> <td class="xl29" align="center" height="20" valign="top" width="71">1.5</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of conveyors to frame and mount</td> <td class="xl26" align="center" height="20" valign="top" width="39">6</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">5</td> <td class="xl29" align="center" height="20" valign="top" width="71">3.7</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of side fairing upper panel</td> <td class="xl26" align="center" height="20" valign="top" width="39">2+2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M5</td> <td class="xl26" align="center" height="20" valign="top" width="58">fr1</td> <td class="xl29" align="center" height="20" valign="top" width="71">0.7</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of side fairing upper panel</td> <td class="xl26" align="center" height="20" valign="top" width="39">2+2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M5</td> <td class="xl26" align="center" height="20" valign="top" width="58">rear2</td> <td class="xl29" align="center" height="20" valign="top" width="71">1.4</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of dashboards upper protection moulding</td> <td class="xl26" align="center" height="20" valign="top" width="39">4</td> <td class="xl26" align="center" height="20" valign="top" width="180">M5</td> <td class="xl26" align="center" height="20" valign="top" width="58">2</td> <td class="xl29" align="center" height="20" valign="top" width="71">1.5</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of lower fairing to frame</td> <td class="xl26" align="center" height="20" valign="top" width="39">4</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">5</td> <td class="xl29" align="center" height="20" valign="top" width="71">3.7</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of silencer protection to lower fairing</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">5</td> <td class="xl29" align="center" height="20" valign="top" width="71">3.7</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of sides</td> <td class="xl26" align="center" height="20" valign="top" width="39">4</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">5</td> <td class="xl29" align="center" height="20" valign="top" width="71">3.7</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of saddle support bush and lower moulded cover</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">5</td> <td class="xl29" align="center" height="20" valign="top" width="71">3.7</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of saddle support lower moulded cover</td> <td class="xl26" align="center" height="20" valign="top" width="39">4</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">4</td> <td class="xl29" align="center" height="20" valign="top" width="71">2.9</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="38" valign="top" width="367">Fastening of rear fairing to saddle support lower molded cover</td> <td class="xl26" align="center" height="38" valign="top" width="39">6</td> <td class="xl26" align="center" height="38" valign="top" width="180">M5</td> <td class="xl26" align="center" height="38" valign="top" width="58">2</td> <td class="xl29" align="center" height="38" valign="top" width="71">1.5</td> <td class="xl26" align="center" height="38" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of rear fairing end to rear fairing</td> <td class="xl26" align="center" height="20" valign="top" width="39">2+2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M5</td> <td class="xl26" align="center" height="20" valign="top" width="58">upper 5</td> <td class="xl29" align="center" height="20" valign="top" width="71">3.7</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of rear fairing end to rear fairing</td> <td class="xl26" align="center" height="20" valign="top" width="39">2+2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M5</td> <td class="xl26" align="center" height="20" valign="top" width="58">lower 3</td> <td class="xl29" align="center" height="20" valign="top" width="71">2.2</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of rear fairing / passenger grab strap</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">12</td> <td class="xl29" align="center" height="20" valign="top" width="71">8.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of internal fairing and side fairing</td> <td class="xl26" align="center" height="20" valign="top" width="39">8</td> <td class="xl26" align="center" height="20" valign="top" width="180">SWP 2.9 x 12</td> <td class="xl26" align="center" height="20" valign="top" width="58">1</td> <td class="xl29" align="center" height="20" valign="top" width="71">0.7</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of dashboard to mount</td> <td class="xl26" align="center" height="20" valign="top" width="39">3</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">5</td> <td class="xl29" align="center" height="20" valign="top" width="71">3.7</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of rider's saddle</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">12</td> <td class="xl29" align="center" height="20" valign="top" width="71">8.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of rider's saddle front mount</td> <td class="xl26" align="center" height="20" valign="top" width="39">4</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">12</td> <td class="xl29" align="center" height="20" valign="top" width="71">8.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of passenger seat lock</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">10</td> <td class="xl29" align="center" height="20" valign="top" width="71">7.4</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of passenger seat lock key-operated control</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">
12
</td> <td class="xl29" align="center" height="20" valign="top" width="71">8.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of passenger footrest supports</td> <td class="xl26" align="center" height="20" valign="top" width="39">4</td> <td class="xl26" align="center" height="20" valign="top" width="180">M8</td> <td class="xl26" align="center" height="20" valign="top" width="58">25</td> <td class="xl29" align="center" height="20" valign="top" width="71">18.4</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of rider's footrest supports</td> <td class="xl26" align="center" height="20" valign="top" width="39">4</td> <td class="xl26" align="center" height="20" valign="top" width="180">M8</td> <td class="xl26" align="center" height="20" valign="top" width="58">25</td> <td class="xl29" align="center" height="20" valign="top" width="71">18.4</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of rider's footrest protection</td> <td class="xl26" align="center" height="20" valign="top" width="39">4</td> <td class="xl26" align="center" height="20" valign="top" width="180">M5</td> <td class="xl26" align="center" height="20" valign="top" width="58">6</td> <td class="xl29" align="center" height="20" valign="top" width="71">4.4</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of rear mudguard</td> <td class="xl26" align="center" height="20" valign="top" width="39">4</td> <td class="xl26" align="center" height="20" valign="top" width="180">M5</td> <td class="xl26" align="center" height="20" valign="top" width="58">6</td> <td class="xl29" align="center" height="20" valign="top" width="71">4.4</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of saddle support</td> <td class="xl26" align="center" height="20" valign="top" width="39">4</td> <td class="xl26" align="center" height="20" valign="top" width="180">M10</td> <td class="xl26" align="center" height="20" valign="top" width="58">50</td> <td class="xl29" align="center" height="20" valign="top" width="71">36.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of coil mounts</td> <td class="xl26" align="center" height="20" valign="top" width="39">4</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">12</td> <td class="xl29" align="center" height="20" valign="top" width="71">8.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:20.25pt" height="27"> <td colspan="6" class="xl36" bgcolor="#999999" height="23" valign="top" width="759">
Right/Left Handlebars and Controls
</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl31" height="20" valign="top" width="367">Description</td> <td class="xl25" align="center" height="20" valign="top" width="39">Qty</td> <td class="xl25" align="center" height="20" valign="top" width="180">Screw/ Nut</td> <td class="xl25" align="center" height="20" valign="top" width="58">Nm</td> <td class="xl28" align="center" height="20" valign="top" width="71">ft-lb</td> <td class="xl25" align="center" height="20" width="14">Note</td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of anti-vibration weights</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">12</td> <td class="xl29" align="center" height="20" valign="top" width="71">8.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Anti-vibration weights metal ring</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M18 x 1</td> <td class="xl26" align="center" height="20" valign="top" width="58">35</td> <td class="xl29" align="center" height="20" valign="top" width="71">25.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of right/left handlebars to the fork</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M8</td> <td class="xl26" align="center" height="20" valign="top" width="58">25</td> <td class="xl29" align="center" height="20" valign="top" width="71">18.4</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Handlebars lock screw</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M6</td> <td class="xl26" align="center" height="20" valign="top" width="58">12</td> <td class="xl29" align="center" height="20" valign="top" width="71">8.8</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of left dimmer switch</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M5</td> <td class="xl26" align="center" height="20" valign="top" width="58">1.5</td> <td class="xl29" align="center" height="20" valign="top" width="71">1.1</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of right dimmer switch</td> <td class="xl26" align="center" height="20" valign="top" width="39">1</td> <td class="xl26" align="center" height="20" valign="top" width="180">M4</td> <td class="xl26" align="center" height="20" valign="top" width="58">1</td> <td class="xl29" align="center" height="20" valign="top" width="71">0.7</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of front brake lever</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M5</td> <td class="xl26" align="center" height="20" valign="top" width="58">8</td> <td class="xl29" align="center" height="20" valign="top" width="71">5.9</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> <tr style="height:12.75pt" height="17"> <td class="xl32" height="20" valign="top" width="367">Fastening of clutch lever</td> <td class="xl26" align="center" height="20" valign="top" width="39">2</td> <td class="xl26" align="center" height="20" valign="top" width="180">M5</td> <td class="xl26" align="center" height="20" valign="top" width="58">8</td> <td class="xl29" align="center" height="20" valign="top" width="71">5.9</td> <td class="xl26" align="center" height="20" width="14"> </td> </tr> </tbody></table> Note: L stands for Loctite Threadlocker. Use the appropriate type listed.