Bolts that hold the screen on

[web Seige]

Hi all, I hope this is in the right forum could anyone point me in the direction of where I can get the bolts that hold the screen on for my 03 Caponord? plus the rubber part that fits through the front plastics. Or at least what they are called so I can search for the correct thing.
Many thanks
Chris.

[GRUMPYGIT]

Hi all, I hope this is in the right forum could anyone point me in the direction of where I can get the bolts that hold the screen on for my 03 Caponord? plus the rubber part that fits through the front plastics. Or at least what they are called so I can search for the correct thing.
Many thanks
Chris.

Hi Chris. the bolts are called Screw with flange M5x9 std aprilia part number 8152339, and the Rubber spacer standard is part number 814630 and any Aprilia dealer should be able to obtain these for you. Steve

[GRUMPYGIT]

Hi it's me again. Don't know where you are in cheshire but these guys below can't be to far away. Steve.

http://aprilia-merseyside.peweb8.m25.co.uk/

[web Seige]

Thanks Grumpy. They are not too far away at all, I will take a trip over. and many thanks for the info.
I made a cock up fitting a touring screen and now I need to replace all 6 bolts.


Chris.

[Leanit]

Our sponsor offers the wellnuts, and probably the hardware as well:

http://www.af1racing.com/store/Scripts/prodView.asp?idproduct=828

- Matt

[Captain Capo]

I'm fairly sure these folks have these 'flange bolts' - I've been to the shop and sure I saw them - I've been meaning to go back and get a stock of the flaged and un-flanged type. They are very cheap... they are M5 x9 and M5 x 12

A2A4 (http://www.a2a4.co.uk/acatalog/A2A4_METRIC_PRODUCTS_A_2_A_4_116.html)

[web Seige]

Thanks for the help guys, I have ordered the bolts and rubber inserts from Aprilia in yorkshire, just waiting on delivery now.

Chris.