Mixture ????

[geoff m]

So I decided to frig about with the mixture screws on the ECU ! WHY !!!!

I set it as per instructions i found on here.....ticks over better, but seems to be a little hesitant off the throttle, is it too rich ? too lean, or do I stop buggering about with it and take it and get it set up properly ?

:whiner:

[ARAIHEAD]

So I decided to frig about with the mixture screws on the ECU ! WHY !!!!

I set it as per instructions i found on here.....ticks over better, but seems to be a little hesitant off the throttle, is it too rich ? too lean, or do I stop buggering about with it and take it and get it set up properly ?

:whiner:

Leave it alone, if it aint broke, dont fix it!!:rolleyes:..... but i suppose you will have to fix it now!!:happy:

[geoff m]

Well, I did have a horrid misfire in the midrange, like it was hitting the rev limiter!! rev counter bouncing up and down EFI light coming on, what a twat !!
But only under very hard acceleration ? seems to have fixed that problem, went for a blast this afternoon, lifts the front off the throttle in third, clutches up in fourth with a bit of a tug on the bars, no sign of misfire, just lumpy at low revs, hey ho !!