View Full Version : OEM Parts Diagram Demonstration '04-'08 SR 50 R Factory
Steve / AF1 Racing
11-16-2007, 03:06 PM
These diagrams are in reference to the Morini engined SR50 Ditech Factory. The Morini engined Ditechs have the RH engine cover seen below:
http://www.af1racing.com/store/ProdImages/st2/morini.jpg
Photos of 2004-2008 SR 50 R Factory , Models with color scheme names and abbreviations:
Steve / AF1 Racing
11-16-2007, 03:08 PM
The following is a step by step demonstration on how to identify an OEM part as seen on AF1 Racing's Online Shop.
For this walkthrough we will assume that you are looking for a Front Fairing for an '03 Tuono.
-First, identify the name of your color scheme by using the photos above.
-Locate the page which contains the part you are looking for, In this case it will be the "2002-2005 RSV Tuono Front Body - Front Fairing" section found in the "2002-2005 RSV Tuono" directory.
-locate part in the diagram (red circle in diagram below)
Steve / AF1 Racing
11-16-2007, 03:08 PM
-The part we are interested in is numbered "1" in the diagram. The corresponding number on the table is indicated with a red circle below.
Steve / AF1 Racing
11-16-2007, 03:09 PM
-Now consult the photos at the beginning of this thread to identify the color scheme of your Tuono.
For this example we will say that we have the 2003 Tulip Red Tuono. Tulip Red is abbreviated as "t.red" in the table.
Steve / AF1 Racing
11-16-2007, 03:10 PM
The left portion of the "Version" column includes a note about the trim level of the part in question.
Here "ST" means Standard models.
-and-
"RG" or "RF" means Factory or Racing models.
When special part data like this applies, you will see a third table beneath the parts frames that decodes the meaning of the abbreviations that are seen.
Steve / AF1 Racing
11-16-2007, 03:12 PM
-The column labeled "Code" contains the part number.
Steve / AF1 Racing
11-16-2007, 03:12 PM
-The column labeled "Q.ty" indicates the quantity that will be needed to complete the application.
For instance, the windscreen is held on with six pins, so a "Q.ty" of six is shown in this column.
Steve / AF1 Racing
11-16-2007, 03:13 PM
The part number is AP8168226.
You can now submit a parts request to AF1 Racing.
:)
Steve / AF1 Racing
11-16-2007, 03:13 PM
Important Note:
In the vast majority of situations, Aprilia does not sell parts "kits." Aprilia parts are typically sold each. In very rare situations some Aprilia parts are sold "complete" meaning that all necessary parts for installation are included. This applies primarily to Accessory parts.
In general, assume that All Aprilia parts are sold each, unless the product description specifically says "complete."
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.