Clutch Switch

[JedB]

Hello,

What is the purpose of part #21 on this page:
http://www.af1racing.com/store/Scripts/prodList.asp?idCategory=922

I do not have it on my race/track bike (runs fine) and I'm wondering if it's needed for my build project?

What info would that part transmit?
To the ECU?

Thanks in advance.
:cheers:

[fast4d]

it allows the starter to operator. I suppose if you cut the switch and connect the 2 wires together you won't notice.

[JedB]

Thank you Fast4D.

I'll have to look and see how the race bike is configured then. It's electrical is slightly different than the loom I have on my build.

:cheers:

[Jet City Racer]

It prevents the starter from working if the bike is in gear and the clutch isn't pulled in. I removed it from mine too and almost fell down when I hit the starter and it almost took off from under me because it was in gear. :eek:

[JedB]

It prevents the starter from working if the bike is in gear and the clutch isn't pulled in. I removed it from mine too and almost fell down when I hit the starter and it almost took off from under me because it was in gear. :eek:

:eek: :eek: :eek: Good to know!!

Do you need to short the circuit, or can you just remove it?

[marcodarq]

hey jed,
i believe you have to connect the wires to close the circuit for everything to work a ok.
marco