Fitting K & N replacement Air filter

[jez55]

Just got my replacement filter and want to DIY! I do not have a MANUAL!

Can someone talk me thru this procedure!
CO2 Adjustment - is there a need to? I am using stock exhaust.
Other factors to be aware of

Thanks a bunch.
Jez 55

[the_grump]

Now, that's a piece of cake....

remove seat
remove right side cover (2 bolts - 1 under tank, 1 by frame tubing
remove the 4 Philips screws from the air filter cover
pull air filter cover off - filter holder comes out with it
push out old filter and put in K&N, which should have arrived pre-oiled?!
reverse procedure
start engine and enjoy - you don't have to fiddle with CO2 etc at all
(theoretically, at least :bump: )

Hope that helps.....

the_grump

[jez55]

Thank you Mr Grump I will attempt the cake.

Jez55