PDA

View Full Version : PROJECT RS: Opening Chapter



Ukrs50rider
12-10-2006, 04:37 PM
Hello, Long time listner etc etc.

Just bought myself a 2000 w reg,24000 km, rs125 full power project bike.

Got her for £600 of a mate who crashed it, usual checks have been carried out on frame, forks etc and all seems to be straight.

He managed a lowside at 20mph, simple mistake of over cooking it in the wet :bangwall:


I'm probably going to be spending about £500 ish to get it back up to a reasonable condition.

Few mods maybe aswell, only visual. But maybe just an arrows end can? and clip ons

Pics follow tomorrow.......:cheers:

Adidas
12-10-2006, 05:19 PM
cool :) .my project is nearly done now

Gman2005
12-10-2006, 05:29 PM
and my project is in the bin lol

random0082
12-11-2006, 04:43 AM
cool, good luck and get some pics up. i recently had a similar off on my 2000 RS at about 25ish as well, and am doing the same modding thing while im at it repairing it. good excuse!

Ukrs50rider
12-12-2006, 11:30 AM
Just a few pictures, only thing done up to now was a qwick muc off and mop over. Also taken the fukd fairings off either side.

http://img294.imageshack.us/img294/3673/photo0167qt0.jpg (http://imageshack.us)

Only done one for now as others have number plate in and cant b arsed to edit them...

The only thing that concerns me is when i rev it the whole bike vibrates, and i mean VIBRATES.As in the whole bike moves across the garage. unless i put my foot against the side stand to stop it..

Any ideas?

Cheers

Ukrs50rider
12-12-2006, 11:34 AM
Another one....http://img294.imageshack.us/img294/90/photo0165kj8.jpg (http://imageshack.us):)

AndyS_RS
12-12-2006, 11:36 AM
The only thing that concerns me is when i rev it the whole bike vibrates, and i mean VIBRATES.As in the whole bike moves across the garage. unless i put my foot against the side stand to stop it..

Any ideas?

Cheers

fahuked bearings, balance shaft gears, clutch basket bearings

RiejuR51
12-12-2006, 11:37 AM
balance shaft?

kezajones
12-12-2006, 12:14 PM
balance shaft?
runs from a gear on the clutch side to keep down on vibrations, its like a little offset weight that spins with the crank

RiejuR51
12-12-2006, 12:16 PM
runs from a gear on the clutch side to keep down on vibrations, its like a little offset weight that spins with the crank
i know what a fecking balance shaft is lol i was wondering if thats what it is lol

whether its the balance shaft out of sync

kezajones
12-12-2006, 12:27 PM
if it was a left hand low side it could of broken the gear.

Ukrs50rider
12-12-2006, 02:10 PM
aH, ok. Cheers lads :worship:

Ukrs50rider
02-18-2007, 07:02 AM
Been a while i know, but little progress has been made since having to buy a car and do driving lessons.

All i have done up to date is ride it for 1 mounth clean bike and strip fairings.

Bought a few items aswell ready to be fitted,

Front fairing/ clock bracket
Ebc HH Front and rear brake pads
Ebc Heavy duty clutch and springs
Plastic cogs behind clutch
Front fairing V piece
Chain and sprokets
New front and rear dunlops
whole engine gasket set

All i can think off at the moment,

Stuff to be done -

The top end
Jl stainless exhuast
Speedo drive
Cush drive
Wavy front and rear discs
New left and right fairings
Repair front nose cone
Buy solo seat

Thats it really - A few pics :happy:

Few questions - Does a aprilia rsv rear disc fit straight onto my bike? ( 5 spoke wheels)

Been looking for correct info but cant find it. a place to buy uprated jets and the correct jetting for a standard bike with a "race" exhuast.

Thanks

http://img295.imageshack.us/img295/4195/s4300017yi3.jpg (http://imageshack.us)

http://img75.imageshack.us/img75/8096/s4300018zg6.jpg (http://imageshack.us)


My bikes together - :)

http://img75.imageshack.us/img75/3295/s4300022vg3.jpg (http://imageshack.us)

RiejuR51
02-18-2007, 07:05 AM
nice to see you have the best rep there! :plus:

dcy
02-18-2007, 07:07 AM
rsv disc should fit mate, i can tell you on monday tho wen i try 2 fit mine!lol.

is it the one on ebay u lookin at???

dcy
02-18-2007, 07:08 AM
i take it you mean his 2005 rep there!!! simply the best one

Aaron552
02-18-2007, 08:01 AM
mmm i agree

priller
02-18-2007, 09:33 AM
Is the pit bike road legal? what cc?

kezajones
02-18-2007, 10:04 AM
thats a thump roadripper 125 and there shite compared to a normal one lol

BTW rsv disk as far as i know is good to go

Norfolk_aprilia
02-18-2007, 10:50 AM
pretty sure ducati 748/916 discs fit aswell.

Peasnall
02-18-2007, 11:27 AM
pretty sure ducati 748/916 discs fit aswell.

yeh im pretty sure they do aswel, and the rs250 wavey rear will fit.

Ukrs50rider
02-18-2007, 12:32 PM
there shite compared to a normal one


I failed to see the difference when i had bought another engine

i had also seen the difference - it was shit

So bought genuine thump. engine for it.:happy:


Bit differnent as well isnt it?!

Cheers for the adive aswell on the discs people..